reverse circulation drill bits

Categories:Reverse Circulation Bits

Country/Region:china

... institutes have been studying the material and structure of drilling tools since 1980. At present, the quality of the best DTH hammers and drill bits produced in China is very close to that of Sweden products. And occupied 95% of the domestic market. But

Brand Name:SOLLROC

Model Number:SRC543 RC bits

Place of Origin:China

...Drilling Reverse Circulation Hammers For Shank SRC543 And Drill Bit Reference the design and production experience of conventional DTH hammer and combine the operating characteristics of RC hammer; internal structure design is optimized to ensure ideal energy transfer and high drilling speed as well as steady sampling. SOLLROC RC hammer model SRC543 specifications: Overall Length (less bit) 1191mm Weight (less bit...

Brand Name:SOLLROC

Model Number:SRC040 RC Drilling Hammer

Place of Origin:China

...Drilling Hammer For Rock And Water Drilling About Rc Drilling Tools Reverse Circulation hammers are designed with an inner sample tube that extends through the center and into the top of the hammer bit. The RC hammer exhausts the air between the bit splines and over the face of the bit. This forces the sample into the recovery holes in the face of the bit, through the center of the hammer and upward through the drill

Categories:Reverse Circulation Bits

Country/Region:china

...Reverse Circulation DTH Bit for Rock Drilling 3" 4" 4.5" 5" 5.5" RC45 / RE004 / RE543 / PR54R / RE542 / RE531 / RE545 / PR40 / PR52 / RE547 / PR54 RC bits sizes available: 1) 3" RC Bits: diameter (86mm-102mm), shank (RE531), 2) 4'' RC Bits: diameter (114mm-127mm), shank (RE004, RE004R), 3) 4.5" RC Bits: diameter (121mm - 133mm), shank (RE542, RE543), 4) 5'' RC Bits...

Brand Name:SOLLROC

Model Number:RC3.5 RC bits

Place of Origin:China

... where the drilling medium, normally high pressure air,is passed between the outer and inner tubes down to the face of the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit. RC bits Model RC3.5 for shank RC3.5

Brand Name:SOLLROC

Model Number:RC bit

Place of Origin:China

..., 4.high penetration rates, and minimal environmental impact. Product Introduce: Reverse Circulation drilling, or RC drilling, uses rods with inner and outer tubes, the drill cuttings are returned to surface inside the rods. The drilling mechanism is a

Brand Name:SOLLROC

Model Number:3''-5.5'' RC Hammer

Place of Origin:China

...Drilling Src004 Reverse Circulation Hammer Product Introduce: RC drilling refers to Dual Wall or Dual Tube Drilling. RC drilling applies two rods with inner and outer tubes.Air is blew down the annulus of the rod and enter into hammer and bit.Rock formation fragments crushed by bit are collected into the inter tube via air hole on the bit...

Brand Name:SOLLROC

Model Number:SRC545,SRC547 RC bits

Place of Origin:China

Reverse Circulation Bits SRC545 SRC547 RC Drill Bits For RC Drilling RC bits Model SRC545 D Optimization of inner structure offers faster drilling speed and more stable operation.Easy maintenance with simple inner structure and strong rigidity With all-in-one collective tube, the RC hammer can be replaced without disassemble.With special design of bit, RC drilling for different sizes of holes only by changing bit...

Brand Name:SOLLROC

Model Number:SRC3.5

Place of Origin:China

...Reverse circulation (RC) drilling uses a bit attached to a down-hole hammer to produce a hole. Unlike diamond drilling, RC drilling produces samples of rock cuttings rather than a sample of rock core. The down-hole hammer is powered by compressed air, which also acts as the medium bringing the drill cuttings up to surface. Sollroc supplys RC tools such as hammers and bits...

Brand Name:SOLLROC

Model Number:SRC052 RC Hammer

Place of Origin:China

...Drilling Hammer About Rc Drilling Tools Reverse Circulation hammers are designed with an inner sample tube that extends through the center and into the top of the hammer bit. The RC hammer exhausts the air between the bit splines and over the face of the bit. This forces the sample into the recovery holes in the face of the bit, through the center of the hammer and upward through the drill...

Brand Name:SOLLROC

Model Number:RE004 Bit

Place of Origin:China

...Drilling Reverse Circulation Down The Hole Bit 121mm for Exploration RE004 Product Introduce: TReverse circulation drilling, or RC drilling, is a form of percussion drilling that uses compressed air to flush material cuttings out of the drill hole in a safe and efficient manner. Thanks to the benefits enjoyed by this method, it’s become a popular technique in mining exploration and is one of the most common drilling...

Brand Name:SOLLROC

Model Number:RE545,RE547 RC bits

Place of Origin:China

...Reverse Circulation RE547 RC Drill Bits For RC Drilling RC bits Model RC5-E545 for shank RE545,RE547 Optimization of inner structure offers faster drilling speed and more stable operation.Easy maintenance with simple inner structure and strong rigidity With all-in-one collective tube, the RC hammer can be replaced without disassemble.With special design of bit, RC drilling for different sizes of holes only by changing bit...

Brand Name:SOLLROC

Model Number:RE542,RE543,RE545,RE547 RC bits

Place of Origin:China

Reverse Circulation RE542 130mm RC Drill Bits For RC Drilling Optimization of inner structure offers faster drilling speed and more stable operation.Easy maintenance with simple inner structure and strong rigidity With all-in-one collective tube, the RC hammer can be replaced without disassemble.With special design of bit, RC drilling for different sizes of holes only by changing bit. RC bits...

Brand Name:SOLLROC

Model Number:SRC004 RC bits

Place of Origin:China

...Reverse Circulation RC Drill Bits For RC Drilling RC bits Model SRC004 Diameter No x Button diameter mm Button angle Flushing holes Shroud Dia mm Weight (kg) Part No. mm inch Gauge Button Front Button 114 4 1/2 8 x 14mm 8 x 13mm 35 2 112 11.8 SRC004-114 118 4 5/8 8 x 14mm 8 x 13mm 35 2 116 12.0 SRC004-118 121 4 3/4 8 x 14mm 8 x 13mm 35 2 119 12.4 SRC004-121 127 5 8 x 14mm 8 x 13mm 35 2 125 12.8 SRC004-127 RC series reverse...

Brand Name:SOLLROC

Model Number:RE545,RE547,PR40,PR52,PR54

Place of Origin:China

... cross contamination of samples; Handles injection of water, foam, oil, and polymers without performance loss; Delivers maximum drilling under water. Sollroc RC Hammers Specifications Hammer Size Hammer Bit Shank Code Hole Range (mm) External Diameter (mm)

Brand Name:SOLLROC

Model Number:PR52 RE052 RC bits

Place of Origin:China

140mm Reverse Circulation PR52 RE052 RC Drill Bits For RC Drilling RC bits Model RC5.5-RE052/RE052R for shank PR52 RE052/RE052R Drill Bit Bit Dia. (mm) No. Air Holes Gauge Buttons Front Buttons Weight (kg) Part No. HRC 115 2 8x14 8x13 14 ...

Categories:DTH Drill Bits

Country/Region:china

...Reverse Circulation Hammers CRE545 Advantages: R.C.Drilling, referred to as " Centre Sample Recovery" or " Dual Wall Drilling",employs a Dual Wall Pipe where the drilling medium, normally high pressure air,is passed between the outer and inner tubes down to the face of drilling bit where it is returned up the centre tube along with the sample cut by the drill bit...

Brand Name:SOLLROC

Model Number:SRC542 RC bit

Place of Origin:China

... representative samples when searching for ore bodies to develop. The reverse circulation method is used predominantly in tough, broken, and abrasive formations. This method offers economic advantages over diamond coring in these environments as well

Brand Name:JYY mechanical

Place of Origin:Tianjin,China

... technologies, and they both use the corresponding drill bit of the impactor for rock drilling. The biggest feature of reverse circulation rock drilling technology is that the rock dust is discharged from the inside of the impactor to the surface, which

Brand Name:SOLLROC

Model Number:SRC545 RC bits

Place of Origin:China

...Reverse Circulation Hammers RC Drill Hammer Shank SRC545 SOLLROC RC hammer model SRC545 specifications: Overall Length (less bit) 1261mm Weight (less bit) 65kg (143lbs) External Diameter 117.5mm Fit bit shank RE545 Hole range 122-135mm Top sub thread 4" or 4.5" Remet or 4" or 4.5" Metzke Working presure 15-35 bar Impact rate at 2.4 Mpa 30Hz Air comsumption 565-988CFM RC Bit face shape selection: 1. Drop Center Bit...