rf attenuator variable

Brand Name:Vinncom

Model Number:VN-LPAT-05560-50W-ONx

Place of Origin:CHINA

... PIM -155dbc 160dbc 50W RF Attenuator Good VSWR Wide band frequency High attenuation accuracy Part Number VN-LPAT-05560-50W-ONx Operating Frequency ( MHz ) 550-6000 600-6000 Impedance ( Ohm ) 50 VSWR ≤1.38 Attenuation (dB) 5 ± 0.9 6 ± 0.9 7 ± 0.9 10...

Brand Name:Vinncom

Model Number:VN-LPAT-05560-100W-OPx

Place of Origin:CHINA

... Frequency ( MHz ) 550-6000 600-6000 Impedance ( Ohm ) 50 VSWR ≤1.38 Attenuation (dB) 5 ± 0.9 6 ± 0.9 7 ± 0.9 10 ± 1.1 15 ± 1.5 20 ± 1.5 IM3 (dBc @ 2×43dBm) -153 / -163 Application Indoor/Outdoor Degree of Protection IP65 ...

Brand Name:Vinncom

Model Number:VN-AT-18G-100W-SMA

Place of Origin:China

...RF Components 60dB Attenuator We can provide a variety of power attenuator, can quantitatively absorb the energy in the transmission line, extend the power range, control the power level, and can be equipped with a small power meter, comprehensive tester or spectrum analyzer can be accurate measure the power or spectrum of various RF...

Categories:RF Attenuator

Country/Region:china

...: Frequency Range(MHz) 698-3800 VSWR ≤ 1.3 Attenuation(dB) 5 6 10 15 20 30 40 Accuracy(dB) ±0.8 ±0.9 ±1 ±1.3 ±1.5 ±1.8 ±2.5 PIM3 (dBc@2*43dBm) ≤ -155 Average Power(W) 100 Impedance(Ω) 50 RF Connector In: N-M/Out: N-F Color Black Relative

Brand Name:FOCC

Model Number:FOCC - ATT013

Place of Origin:China

... significantly Variable the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot ...

Brand Name:UNIFIBER-OEM

Model Number:Manual Variable Optical Attenuator

Place of Origin:CHINA

Ultra-Low Loss Manual Variable Optical Attenuator Single Mode Variable in-line optical attenuators comprise a dual fiber collimator and a reflection component separated by a linear moveable ND filter. They are used to permit dynamic control of ...

Brand Name:FOCC

Model Number:FOCC - ATT013

Place of Origin:China

... significantly Variable the wave form itself. This is often a requirement in Dense Wave Division Multiplexing (DWDM) and Erbium Doped Fiber Amplifier (EDFA) applications where the receiver cannot ...

Brand Name:GAPHO

Model Number:Fiber Optical Attenuator

Place of Origin:China

high reliability MEMS variable optical attenuator VOA 1310 1480 1550 nm fiber diameter 900 umB MEMS Variable Optical Attenuator ..docx... The MM Series VOA is based on a proprietary micro-electro-mechanical mechanism featuring compact design, simple ...

Model Number:ST/SC/LC/FC/MPO/MTRJ/MU

Place of Origin:Shenzhen, China

FC/ PC​ Fiber Optic Adapters In-Line Fiber Optic Variable Attenuator VOA Variable Optical Attenuator Description Fiber optic patch cables are used in two major application areas: computer work station to outlet and patch panels or ...

Brand Name:Unifiber or OEM

Model Number:PM Mems VOA

Place of Origin:China

...Variable Optical Attenuators (VOA) Application Channel on/off switching Gain-tilt control in EDFAS Receiver protection Power control and equalization in multi channel System Features Low Power Consumption Insensitive to Shock and Vibration Low Insertion Loss & Low PDL Low WDL &Compact Design High Reliability and Stability Descrition of 1310nm 1550nm Single Mode PM MEMS Variable Optical Attenuator...

Brand Name:Sopto

Model Number:SPTK-3303

... of short-range communication systems, and system experiments. It is capable of continuously variable attenuation of optical signals. Widely used in digital and analog modulation systems for communication equipment. Features ● Stepwise attenuating by

Brand Name:FURONG

Model Number:Fiber Optic Attenuator

Place of Origin:Guangdong, China

... with TIA/IEA, IEC, RoHS Wavelength 850nm Attenuation Range 0 - 30 dB Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. Features: Various Modes of

Brand Name:UNIFIBER-OEM

Place of Origin:CHINA

... basic types of optical attenuators are fixed, step-wise variable, and continuously variable. Features ▪ Low insertion loss ▪ High return loss ▪ Ease of installation ▪ Low cost ▪ Reliability ▪ Low environmental sensitivity ▪ ...

Brand Name:UNIFIBER-OEM

Place of Origin:CHINA

... basic types of optical attenuators are fixed, step-wise variable, and continuously variable. Features ▪ Low insertion loss ▪ High return loss ▪ Ease of installation ▪ Low cost ▪ Reliability ▪ Low environmental sensitivity ▪ ...

Brand Name:Haiyu Optical

Model Number:HYG-ATU-FC-SC-008

Place of Origin:China

... 62.5/125 applications. Our Male to Female Buildout Optical Attenuation are available in all fiber modes with LC, LC/APC SC, SC/APC, FC, FC/APC and ST types. The Air-Gap Variable Attenuator has a ceramic alignment sleeve. Can be used on both multimode and

Brand Name:UNIFIBER-OEM

Model Number:UNFOAFC

Place of Origin:CHINA

... telecommunication system and optical transmission system. These attenuators can be applied in FTTH, CATV, WAN, fiber optical sensor and metropolitan area network. They are often used as the testing equipment. Application: Optical ...

Brand Name:CY COM

Model Number:SC Female to male

Place of Origin:Shenzhen China

...Variable Attenuator Introduction: Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver. Features: Low back reflection and Low PDL High precision attenuation value Precision control of attenuation...

Brand Name:CY COM

Model Number:ST

Place of Origin:Shenzhen China

... the power level of an optical signal. It could be applied to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any

Brand Name:CY/OEM

Place of Origin:Hu Bei Cina

Model Number:LC/APC

...Variable Optical Attenuator Low Back Reflection SC / UPC APC Fiber Optic Attenuator For High Speed Fiber Optical Transmission System Place Of Origin: Guangdong, China (Mainland) Brand Name: DYS/OEM Model Number: SC/APC Connector Type: SC/APC Return Loss: > 55dB (UPC) ≥ 65dB (APC) Operational Temperature: -40 To+ 75℃ Attenuation Tolerance: 1 To 10dB ± 0.5dB;11 To 30dB ±5%dB Operation Wavelength: 1260 To 1650nm Attenuation...