roller stem wireline tool string

Brand Name:Ruixin

Model Number:2inch ID 2.5inch ID 3inch ID 4inch ID

Place of Origin:China Baoji

Tool Trap Wireline Pressure Control Equipment I. Product brief description: Anti-drop device, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It...

Brand Name:Ruixin

Model Number:3inch ID 4inch ID

Place of Origin:China Baoji

... falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve. II. Main technical parameters: Number Specification Pressure ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Gauge Carrier

Place of Origin:China

Gauge Carrier For Drill Stem Testing Tools With Four & Eight Electronic Memory Gauge The Gauge Carrier is the part of drill stem testing tool string to recording the data during testing operation. The gauge carrier is used for carrying electric memory ...

Brand Name:Techcore

Model Number:Multi-Cycle Circulating Valve

Place of Origin:CHINA

... is operated by differential pressure which can offer multi open and closed cycles. Shear pins in the multi- cycle circulating valve hold the tool in the closed position during the run-in

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.125inch 2.5inch

Place of Origin:China Baoji

...Wireline Fishing Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod with grooves and guide surfaces. It is run into the well in the conventional manner, where the wireline tool...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Drain Valve

Place of Origin:China

Sleeve Type Drain Valve For High Pressure Drill Stem Testing Service The Sleeve Type Drain Valve is the part of drill stem testing tool string. The drain valve consists of a ported body, sliding sleeve, and rotating nut, which controls the position of the ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:MFE

Place of Origin:China

... DST Service The Multi-Flow Evaluator / MFE is a new approach in drill stem testing, which is the main part of openhole drill stem testing tool string. The multi flow evaluator improves the control during the testing operation and evaluation of test ...

Brand Name:Ruixin

Model Number:1.25inch-1.75inch

Place of Origin:China Baoji

...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti-upward movement tool. After the successful release, the upper joint of the hand-off tool and the cylinder body are

Brand Name:Ruixin

Model Number:2inch

Place of Origin:China Baoji

... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch hole. II. Structural characteristics: The ball structure provides the ...

Brand Name:Ruixin

Model Number:1.25inch-1.75inch

Place of Origin:China Baoji

... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool is connected with the anti-upward movement tool, and after the releasing is successful, the upper joint of the

Brand Name:Techcore

Model Number:DST Slip Joint

Place of Origin:CHINA

...accepts the movement associated with ocean heave or temperature change without allowing the movement to disturb the placement of downhole tools. The round mandrel slip joint is designed and manufactured according to NACE MR0175, and suitable for working in

Brand Name:Techcore

Model Number:DLFP7-35

Place of Origin:CHINA

...Wireline Pressure Control Hydraulic Tool Catcher WPCE The Hydraulic Tool Catcher is designed to engage and retain the tool top fish neck or rope socket of any tool string that has accidentally collides with the stuffing box or grease injection head, and strips off the wireline from the rope socket. It will prevent the tool string from falling downhole. The Hydraulic Tool...

Brand Name:Ruixin

Model Number:1.25inch-1.75inch

Place of Origin:China Baoji

...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with the basic tool string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool is connected with the anti-upward movement tool...

Brand Name:Ruixin

Model Number:1.5inch-6inch

Place of Origin:China Baoji

Anti Corrosion Wireline Fishing Tool Wireline Blind Box Wireline Fishing Tool Wireline Blind Box I.Overview The Blind Box is used to beat down an obstruction encountered in the tubing string.It is also widely used to cut wireline on a rope socket during ...

Brand Name:Ruixin

Model Number:1.5inch-6inch

Place of Origin:China Baoji

2 inch Wireline Blind Box Wireline Fishing Tool Wireline Fishing Tool Wireline Blind Box The Blind Box is used to beat down an obstruction encountered in the tubing string.It is also widely used to cut wireline on a rope socket during fishing operations ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:5" Recloseable Circulating Valve

Place of Origin:China

...Stem Testing Service The Recloseable Circulating Sleeves are assembled as part of tubing string to establish communication between the tubing string and the casing annulus for single or multiple-tubing string completions. The Reclosable Circulating sleeves are annulus pressure operated without use of a wireline or coiled tubing tools...

Brand Name:RuiXin

Model Number:FG7.6-70-4ft/8ft

Place of Origin:Baoji,China

Wireline Lightweight Lubricator 3Inch 10,000PSI Wireline Pressure Control Equipment overview The lightweight lubricator is pipe with standing high pressure, used to accommodate the entry and exit of downhole tools into the well under pressure. The lightweight lubricator can accommodate basic tool strings...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.125inch 2.5inch

Place of Origin:China Baoji

...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed of a solid rod with a groove and a guide surface. It goes into the well in a conventional way. If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel wire tool...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.125inch 2.5inch

Place of Origin:China Baoji

.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel wire tool is seriously

Brand Name:RuiXin

Model Number:1.5inch

Place of Origin:China BaoJi

... and a guide surface. It goes down the well in a conventional manner, and if there are no foreign objects on the cap, the bevel of the cutter will cut the wire directly on the cap. When the wire tool is severely buried by sand, debris, or