single station plug socket tester

Brand Name:HongCe

Model Number:HC9931

Place of Origin:China

IEC60884-1 clause 24.18 figure 35. Verification of groove hole and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.18, figure 35. Application: It is used to ...

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Brand Name:kingpo

Model Number:KP-CG95

Place of Origin:china

IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is ...

Brand Name:HJ

Model Number:HC9916

Place of Origin:China

Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16. ...

Brand Name:SHC

Model Number:SC-SANS 164

Place of Origin:China

SANS 164 Gauge For Plug And Socket South African Standard Gauges Specification: Product Model Standard Product Name SC-S4-11 Edition 5 ANNEX A SANS 164-1 SC-S4-12 Edition 5 ANNEX B SANS 164-1 SC-S4-13 Edition 5 ANNEX C SANS 164-1 SC-S4-14 Edition 5 ANNEX...

Brand Name:SHC

Model Number:SC-SANS 164

Place of Origin:China

SANS 164 Gauge For Plug And Socket South African Standard Gauges Specification: Product Model Standard Product Name SC-S4-11 Edition 5 ANNEX A SANS 164-1 SC-S4-12 Edition 5 ANNEX B SANS 164-1 SC-S4-13 Edition 5 ANNEX C SANS 164-1 SC-S4-14 Edition 5 ANNEX...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2)...

Brand Name:PEGO GROUP

Model Number:PG-UL498

Place of Origin:China

UL498 Plug and Receptacles Test Gauges High Precision with Calibration Certificate Standard Number Description Figure number QTY UL498 Articulate probe with web stop Figure 9.1 1 UL498 Probe figure 10.1 1 UL498 Flat probe figure 31.1 1 UL498 Reference ...

Place of Origin:China

Brand Name:HongCe

Model Number:SG-1

Screwed Glands Tester Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres...

Brand Name:KingPo

Place of Origin:China

...Plug Socket Tester For Dimensional Measurement VDE 0620 Germany Plug Socket Tester For Dimensional Measurement And Verification Of Plug Socket Of Household Appliance Product information: These measuring gauges confirm to the standard of VDE0620, which are used for the dimensional measurement and verification of the plug socket...

Place of Origin:China

Brand Name:HongCe

Model Number:IN-1

Insulation Sleeves of Plug Pins Abrasion Test Apparatus Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the ...

Place of Origin:China

Brand Name:KeRang

Apparatus to verify the fixation of pins in the body of the plug FP-1 Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Brand Name:KingPo

Place of Origin:China

... Plug Socket Tester GOST 7396.1-89 IEC 83-75 Group C Socket Measure Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs,

Place of Origin:China

Brand Name:KeRang

Test Apparatus for lateral stress LS-1 Product overview: The appliance conforms to the standard of IEC884 figure 13. It is suitable for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see...

Brand Name:HJ

Model Number:HC9917

Place of Origin:China

Plug Socket Test Equipment For Testing Cord Retention 60 Times/Min Standard of Apparatus for testing cord retention: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 23.2 and figure 20. ...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus...

Brand Name:SHC

Model Number:SC-BS-F33

Place of Origin:China

BS1363 Figure 33 Apparatus For Torsion Test On Pins Parameters: Standards BS1363 Figure 33 Function For Torsion Test on Pins Clamp for adaptor 1 set Torque tube 2 Material Stainless steel BS1363 List of references Figure 33-apparatus for torsion test on ...

Brand Name:SHC

Model Number:SC-BS-F33

Place of Origin:China

BS1363 Figure 33 Apparatus For Torsion Test On Pins Parameters: Standards BS1363 Figure 33 Function For Torsion Test on Pins Clamp for adaptor 1 set Torque tube 2 Material Stainless steel BS1363 List of references Figure 33-apparatus for torsion test on ...