slickline wireline running tool

Brand Name:Ruixin

Model Number:2-3/8 Tubing~4-1/2Tubing

Place of Origin:China Baoji

2.875 Inch Alloy Steel Tubing Stop Wireline Pulling Tool Tubing Stop Wireline Pulling Tool Ⅰ. Introduction The type tubing perforator (tubing punch) is a mechanical device designed to perforate standard and heavy wall tubing under pressure.The tubing ...

Brand Name:Ruixin

Model Number:2-3/8 Tubing~4-1/2Tubing

Place of Origin:China Baoji

QLS SR Tubing Perforator Punch Wireline Pulling Tool Tubing Perforator Punch Wireline Pulling Tool Ⅰ. Introduction Tubing Perforator Punch is a mechanical device designed to perforate standard and heavy wall tubing under pressure. Deployed into the wel...

Brand Name:Best

Model Number:Horiztontal

Place of Origin:China

..., or debris from the wellbore or near the wellhead. It is a high-strength and wear-resistant device. The steps involved in using the horizontal wireline fishing tool for recovery operations are as follows: 1. Install the horizontal wireline fishing tool at

Brand Name:Ruixin

Model Number:1.5inch - 3inch

Place of Origin:China Baoji

...Tools For Wireline Pulling Tool I. Overview: The S-type Pulling tool is an external Pulling tool. Its structure principle is similar to the JD type fishing tool, the outer fishing neck is grasped by a special claw, and it can be shaken down to release it. According to the different grip distance, it can be divided into SB and SS. II. The main technical parameters of the tool...

Brand Name:Ruixin

Model Number:1.5inch - 4inch

Place of Origin:China Baoji

..., a cylinder, a guide joint, an auxiliary spring and a salvage claw. The specific structure is shown in the attached drawings. III. Working principle: This tool is mainly used for salvaging the plunger rising to the wellhead.

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch,3inch,4inch

Place of Origin:China Baoji

...Tools Wireline Pulling Tool​ I. Overview: The R-type fishing tool is an external fishing tool. The structure principle is similar to the JU type fishing tool, the outer fishing neck is grasped by a special claw, and it can be shaken downward to release the hand. According to the different grip distance, it can be divided into three types: RB, RS and RJ II. The main technical parameters of the tool...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 2inch 2.5inch.3inch,4inch

Place of Origin:China Baoji

JD Type Pulling Tool Wireline Pulling Tool I. Overview: JD fishing tool is a fishing tool that can drop and salvage tools or instruments with an outer fishing neck (such as balance rods, plugs, pressure gauges, etc.). It can be knocked down to get rid of ...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 2inch 2.5inch.3inch,4inch

Place of Origin:China Baoji

JD Pulling Tool Wireline Pulling Tool I.Introduction JD pulling tool is a fishing tool that can be used to launch and salvage tools or instruments with external salvage necks (such as prong, plugs, pressure gauges, etc.). It can knock down and release you...

Brand Name:Ruixin

Model Number:1.25inch-2inch

Place of Origin:China Baoji

Heavy Duty Salvage Release Tool Wireline Pulling Tool I.Introduction Heavy Duty Salvage Release Tool It is a throwing tool used to salvage tools or instruments with external salvage necks (such as balance rods, plugs, restrictors, etc.). It can be released...

Brand Name:Ruixin

Model Number:1.5inch - 3inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I. Overview: S-type fishing tool is an external fishing tool. Its structure principle is similar to JD fishing tool, and the outer fishing neck is grasped by special claws, which can be released by downward shock. According to the different gripping distance, it can be divided into SB and SS II. Main technical parameters of tools...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch,3inch,4inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool​ I. Overview: The R-type fishing tool is an external fishing tool. The structure principle is similar to the JU type fishing tool, the outer fishing neck is grasped by a special claw, and it can be shaken downward to release the hand. According to the different grip distance, it can be divided into three types: RB, RS and RJ II. The main technical parameters of the tool...

Brand Name:Ruixin

Model Number:1.5inch-4inch

Place of Origin:China Baoji

Heavy Duty Pulling Tool Wireline Pulling Tool 3.5 inch I.Introduction Heavy casting and fishing tool is a casting and fishing tool used to catch tools or instruments with external necks (such as balance rods, plugs, throttles, etc.). It can be jolted ...

Brand Name:Ruixin

Model Number:2.875inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I. Overview: This special salvage tool is a special tool for salvaging plungers. II. Second, the technical parameters: Specification: 2-7/8inch Fishing neck: 1.375inch Connecting thread: 15/16-10UN Fishing diameter: 1.375inch III. Working principle: This tool...

Brand Name:Techcore

Model Number:Wireline accelerator

Place of Origin:CHINA

Wireline Heavy Duty Accelerator Alloy Steel Wireline Basic Tools The heavy duty accelerator is a wireline basic tools for wireline fishing operation. The wireline heavy duty accelerator is used with Hydro-Mechanical and Spring Jars to reduce shocks at Rope...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch,3inch,4inch

Place of Origin:China Baoji

2 inch R Type Pulling Tool Wireline Pulling Tool I. Introduction The R type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

Wireline Pulling Tools GS pulling tools I.Overview: The GS type caster is a tool for casting the inner salvage neck, which can be sheared down and released. Commonly used for casting and salvaging lock cylinders, packers and bridge plugs with an internal salvage neck. By attaching the GU connector (up cut connector), it can be converted into an up cut release tool...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...

Brand Name:Ruixin

Model Number:2inch 2.5inch 3inch 3.5inch

Place of Origin:China Baoji

2 inch GR Type Pulling Tool Wireline Pulling Tool Ⅰ. Introduction GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling tool (without shear pin), which can be released by upward shear. It is usually used for fishing ...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I.Overview The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...