slider stepper motor xy axis

Brand Name:VIC-TECH

Model Number:SM20-55-T

Place of Origin:Jiangsu, China (Mainland)

...screw on top. It has a brass slider produced by machine working, and the lead screw in the middle is M3*0.5P Also it has double linear bearings to support the slider, with better stability and reliability. There are two M2.5 threaded holes on slider, where

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:China

... to provide precise linear motion. This motor has a travel per step of 0.02mm, a motor type of Linear PM Stepper Motor with Slider, a coil resistance of 20Ω/phase, a pull-out thrust of 80g min (500 PPS) and a maximum starting frequency of 800Hz(Min). This

Brand Name:RUIDA

Model Number:RDC7132G

Place of Origin:Mainland China

...XY Axis Stepping Motor Driver For Laser Cutting And Engraving Discroption of RDC7132G: The RDC7132G, a precision laser cutting and engraving control system developed by Ruida Technology, boasts a built-in XY-axis stepper motor driver for seamless operation. However, for Z-axis movement control, it requires the installation of additional external stepper...

Brand Name:VIC-TECH

Model Number:VSM10152

Place of Origin:China

...slider linear stepper motor with 4 pins FPC Description: This VSM10152 motor is 10mm diameter linear stepper motor with lead screw + slider. Step angle is regular 18°/step, lead screw is M2*P0.4, step length is 0.02mm/step (Step length means linear distance that slider travels when the motor...

Brand Name:VIC-TECH

Model Number:SM20-55L-T

Place of Origin:China

... bearings, and they can provide strong support to the slider, and make sure slider can move fluently when the load goes up. Lead screw is regular M3 screw, pitch is 0.5mm, and the motor step angle is 18°/step, thus it takes 20 steps to rotate one turn.

Brand Name:VIC-TECH

Model Number:SM20-21L-T

Place of Origin:Jiangsu, China (Mainland)

...help of linear bearings, the stability of slider is greatly improve. The lead screw is regular M3*0.5P thread, so when the motor rotate one turn, slider will move one pitch (0.5mm). Step angle of the motor is 18 degree, so when the motor takes 20 steps, it

Brand Name:VIC-TECH

Model Number:VSM08248

Place of Origin:Jiangsu, China (Mainland)

...slider stepper motor 3.3V DC screw stepper motor with bracket VSM08248 is a special micro stepping motor (or linear stepping motor), with a bracket and a movable slider (when the motor rotates, the slider will move forward or backward), the moving speed can be adjusted by precision Micro-stepping motor...

Brand Name:VIC-TECH

Model Number:VSM0806

Place of Origin:China

...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0.02mm/step (step length means the linear distance it travels when the step motor takes one single step.) The

Brand Name:VIC-TECH

Model Number:VSM0806

Place of Origin:Jiangsu, China (Mainland)

..., the motor rotates 20 steps per revolution, and the commonly used pitch of the screw is 0.4 mm, so the position control accuracy can reach 0.02 mm. If you ...

Brand Name:VIC-TECH

Model Number:SM15-80L

Place of Origin:Jiangsu, China (Mainland)

...slider motor 12VDC linear stepper motor 2-phase 4-wire Stepper Motor SM1504 is a precision micro step motor, the output shaft with a pitch of 0.5mm of the screw, through the screw and the screw rod supporting the turn of the screw into a thrust. Motor basic step angle is 18 degrees, the motor...

Brand Name:Vic-Tech

Model Number:VSM10152

Place of Origin:china

...Stepper Motor is a stepper motor with slider, designed to provide precision linear motion. It is equipped with a pull-in torque of 3.5 Gf.cm at 480 Pps, 2-phase excitation, and supports CW/CCW rotation. This stepper motor with slider is also known as a slider linear stepping motor...

Brand Name:VIC-TECH

Model Number:VSM10152

Place of Origin:China

...slider linear stepper motor with 4 pins FPC Description: This VSM10152 motor is 10mm diameter linear stepper motor with lead screw + slider. Step angle is regular 18°/step, lead screw is M2*P0.4, step length is 0.02mm/step (Step length means linear distance that slider travels when the motor...

Brand Name:VIC-TECH

Model Number:SM20-35L

Place of Origin:Jiangsu, China (Mainland)

...slider screw stepper motor 12V DC pm stepper motor SM20-35L is a precision screw motor with a pitch of 0.4mm between the output shaft and the screw. The rotation of the screw and the screw support the screw to generate thrust. The basic step angle of the motor is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:SM15-45L

Place of Origin:Jiangsu, China (Mainland)

...slider screw stepper motor 6V DC pm stepper motor SM15-45L is a precision screw motor. The pitch between the output shaft and the screw is 0.4mm. The rotation of the screw and the screw supports the screw to generate thrust. The basic step angle of the motor is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:Jiangsu, China (Mainland)

...slider linear stepper motor 3.3V dc screw motor with bracket stepper motor This is an 8mm precision micro stepper motor. The pitch between the output shaft and the lead screw is 0.4mm. The lead screw and the lead screw support the lead screw to rotate and generate thrust. The motor step angle is 18 degrees, the motor...

Brand Name:VIC-TECH

Model Number:VSM08102

Place of Origin:China

...a Small Linear Motor with a compact design and an effective stroke of 10 Mm. This linear motor is equipped with a special slider which, when energized, moves in a linear motion. The coil resistance is 20Ω/phase and the motor is powered by a 3.3 to 5 V

Brand Name:VIC-TECH

Model Number:SM20-55L-T

Place of Origin:China

... bearings, and they can provide strong support to the slider, and make sure slider can move fluently when the load goes up. Lead screw is regular M3 screw, pitch is 0.5mm, and the motor step angle is 18°/step, thus it takes 20 steps to rotate one turn.

Brand Name:VIC-TECH

Model Number:VSM0806

Place of Origin:China

...standard M2*P0.4 lead screw, and motor step angle is standard 18 degrees. Thus it takes 20 steps to rotate one turn, and motor’s step length is 0.02mm/step (step length means the linear distance it travels when the step motor takes one single step.) The

Brand Name:VIC-TECH

Model Number:VSM1068

Place of Origin:China

... screw. This motor does not have slider, and customers need to design a slider to match it in order to make it work. We also have other motors with slider, which can do linear movement directly. If customers do not want to design a slider, and motors with

Brand Name:ASLONG

Model Number:42BY

Place of Origin:China

..., high accuracy Application: automation equipment industry, engraving machine, packaging machine, non-standard equipment, XY axis movement platform, CNC machine tool, precision machine tool, cutting machine, feeding machine embroidery machine Datasheet: