socket switch life testing system

Place of Origin:Guangdong, China

Brand Name:Glomarket

Model Number:PS0325

Products Description Glomarket Tuya 16A 220V Smart Power Plug Energy Monitor Alexa Voice Control US Mini WiFi Smart Plug For Smart Home 1. Support network status normal test 2. Support remote control plug switch 3. Support timer to switch on and off, ...

Brand Name:Infinity Machine

Model Number:RS-6300D

Place of Origin:Made in China

...Testing Machine / Laptop Torque Testing Equipment Model: RS-6300D Purpose: Apply for the torque test of Note-book hinge, mobile hinge /full unit, electronic dictionary hinge or whole unit, rotating switch and so on. Adopt windows displayer in English program, easy operating, automatic memory ( torque & angle curve, torque life time curve, test report ), also can memorize all the test...

Place of Origin:China

Brand Name:HongCe

Model Number:CF-2

Coupler Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force...

Brand Name:NEW LIGHT OPTICS

Model Number:NLAS002

Place of Origin:China

Quantum-Safe CAT7 Sockets: Post-Quantum Cryptography Over Copper Description First look at NIST-approved solutions: Lattice-based encryption at 10Gbps Quantum key distribution via power lines TEMPEST-certified shielding against side-channel attacks Lab ...

Brand Name:Sinuo

Model Number:SN2210-26

Place of Origin:China

IEC60335-2-24 φ75mm Sphere Test Probe Standards & Clauses: The φ75mm test rod meets the standard requirements of IEC 60335-2-24 clause 21.102. Application It is used for verifying the lamps of household appliances is protected against mechanical shocks. ...

Brand Name:Sinuo

Model Number:SN2119-4

Place of Origin:China

IEC 60884-1 Clause19 Temperature Rise Test Flush-mounted Box with Pinewood Blocks Product information: This flush-mounted box meets the requirements of IEC60884-1 clause19 for temperature rise test. It is made of pinewood blocks, plaster and specific ...

Brand Name:Sinuo

Model Number:SN2210-23

Place of Origin:China

IEC 60065 Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare...

Brand Name:Sinuo

Model Number:SN1109

Place of Origin:China

IEC 60811 Stainless Steel 4000cm3 Air Bomb Tank Oxygen Bomb Aging Chamber for Cable Testing Equipment introduction: This oxygen bomb (air bomb) aging test chamber conforms to the standard requirements of IEC 60811-1-1 sub clause 9.1 and IEC 60811-1-2 sub ...

Brand Name:Sinuo

Model Number:SN2122B

Place of Origin:China

IEC61439-1 High Energy Pendulum Impact Test Apparatus Equipment Introduction: The high energy pendulum impact test apparatus is designed and manufactured according to the requirements of IEC61439-1:2009, IEC62262:2002 clause 6, IEC60068-2-75, etc. It is ...

Brand Name:Sinuo

Model Number:SN2314

Place of Origin:China

IEC 60245-1 Cable Insulation Sheath Material Thermal Extension Test Device 3 Stations Product Introduction: This test device conforming to the standard of IEC 60245-1. The thermal extension device is refined with special high temperature resistant ...

Brand Name:Sinuo

Model Number:SN2210-35

Place of Origin:China

IEC 62368-1 Figure V.1 Stainless Steel Joint Test Probe Product Overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.2 and figure V.1, UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 ...

Brand Name:Sinuo

Model Number:SN2210-14

Place of Origin:China

IEC 61032 Figure 14 Test Probe 31 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 31 figure 14, etc. This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding sys...

Brand Name:Sinuo

Model Number:SN2210-16

Place of Origin:China

IEC 61032 Figure 16 Test Probe 41 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 41 figure 16, IEC60335-1 Clause 8.1.3, etc. This probe is intended to verify the protection against to glowing heating elements. ...

Brand Name:Sinuo

Model Number:SN2210-17

Place of Origin:China

IEC 61032 Figure 17 Test Probe 43 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 43 figure 17, etc. This bar is intended to verify the protection of fixed and portable visibly glowing radiant heaters. Probe ...

Brand Name:Sinuo

Model Number:SN2210-7

Place of Origin:China

IEC 61032 Figure 7 Test Probe 11 IEC 61032 Figure 7 Unjointed Test Probe 11 For Verifying Enclosure Openings Product Overview: This probe conforms to the standard requirements of IEC61032 fig.7 test probe 11, IEC 60065:2014 clause 9.1.7, etc. This probe...

Brand Name:Sinuo

Model Number:SN2103

Place of Origin:China

IEC 60320-1 Coupler Heating Resistance Test Device Equipment overview: The coupler heating test device is designed and manufactured according to IEC60320-1 clause 18.2 and figure 13. It is used to check the heat resistance of coupler in hot conditions and ...

Brand Name:Sinuo

Model Number:SN1113L

Place of Origin:China

IEC60884-1 Clause 23.2 Cord Anchorage Force and Torque Test Equipment Standard and Clause: The Cord Anchorage Force and Torque Test Equipment is designed and manufactured according to the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, ...

Brand Name:Sinuo

Model Number:SNQC11012

Place of Origin:China

IEC 60998-2-2 Terminal Mechanical Stress Test Apparatus Product Information: The Terminal Mechanical Stress Test Apparatus is designed and manufactured according to the standard requirements of IEC 60998-2-2, IEC 60084 figure 1, IEC884 figure 11, and etc...

Brand Name:Sinuo

Model Number:SN2501

Place of Origin:China

IEC 60898-1 Clause 9.10 Comprehensive Test Equipment for Circuit Breaker Tripping Characteristics Product information: The test equipment is designed and manufactured according to the standard requirements of IEC60898-1 clause 9.10, IEC60947-1 clause 7.2...