soil testing apparatus

Brand Name:UV aging test chamber

Model Number:B-ZW

Place of Origin:China

... of ±0.5℃ and an accuracy of ±0.5℃. It has a temperature range of RT+10℃-70℃ and UV irradiance uniformity of ±5%. This UV radiation durability testing equipment is well-suited for applications in the medical, automotive, aerospace, and

Brand Name:Pego Electronics

Model Number:PG-DFA

Place of Origin:China

...Test Apparatus for Deflection on Screwless Terminals 1. Introduction The test apparatus for deflection on screwless terminals is to meet the test requirements of IEC60884-1 clause 12.3.12 and figure 12 for conducting deflection test to conductor connect with screwless terminals and testing the voltage drops. The test apparatus consists by deflecting device and voltage drop meter. 2. Specification Test...

Brand Name:YUYANG

Model Number:WCT

Place of Origin:CHINA

... by distillation in JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by

Brand Name:Lonroy

Model Number:LR-Q024

Place of Origin:China

...Testing Machine Insert Life Cycle Test Apparatus 1. Product Description This machine is suitable for various connector insertion and removal life tests. It allows for setting the number of tests, adjustable speed and retraction stroke, and displays the degree value. It is the most cost-effective insertion and removal life testing machine available on the market today. 2. Specification Test...

Brand Name:DAXIAN

Model Number:DX8617

Place of Origin:China

...Test Apparatus Lab Testing Machine 1.Introduction Flame-penetration tests are to be conducted using a refractory-lined gas-fired combustion chamber open at the top. 2. Standard: UL181. 3. Test Method: 3.1 At the end of the pre-heat and stabilization period, the calcium silicate board is to be removed andthe air duct test...

Brand Name:vouch

Model Number:5340

Place of Origin:CHINA

Special vehicle vertical burning tester of 5340 Description This test equipment conforms to the requirements of GB32086 standard.Used for vertical combustion test of certain kinds of automotive interior materials.Powder baking paint for product casing, ...

Brand Name:vouch

Model Number:5501

Place of Origin:china

Model:5501 Accord with standard:IEC60950 GB4943 Technology data: inner size:1120w*600d*1020h inner capacity: ≥0.5cubic hot wire length:250mm hot wire diameter:0.5mm cold resistance wire:5.28 ou wire power:0.26w/mm+-4% test time:0.01-999.99s stop burning ...

Brand Name:SHC

Model Number:SC-WATA

Place of Origin:China

...Test Apparatus 3 work station cable tester Technical Parameters: Power supply AC230V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Products Introduction: This apparatus...

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

IEC60884 Fig11 Test Apparatus For Checking Damage To Conductors Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, ...

Brand Name:KINGPO

Place of Origin:China

...simulate rain dripping on the ground, the water splash on electrical products from the ground. It is used for the water proof performance test for the bottom of household electrical appliances, such as electric food processing machinery, electric stoves,

Brand Name:KINGPO

...standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time.

Brand Name:KINGPO

Place of Origin:Mainland China

... standard requirement of ISO 4532. It is used to judge the impact resistance of the vitreous and porcelain enamels. As the below picture shown, this test apparatus is made up with a striking bolt with a 5 mm steel ball tip which is shot once against the

Brand Name:ZONSKY

Model Number:ZY6066-PC

Place of Origin:DONGGUAN, CHINA

Automatic Micro Controlled Plastic Smoke Density Test Apparatus IEC 61034 Description: The test apparatus suitable for measuring the smoke emitted by wires and cables burning under specific conditions, such as horizontal combustion of some cables or ...

Brand Name:SHC

Model Number:SC-WATA

Place of Origin:China

...Test Apparatus 3 work station cable tester Technical Parameters: Power supply AC230V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Products Introduction: This apparatus...

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

IEC60884 Fig11 Test Apparatus For Checking Damage To Conductors Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, ...

Brand Name:LB

Model Number:MFET

Place of Origin:China

... of a garment in a simulated flash fire environment that controls the heat flux, flame distribution and duration of the flame test manikin. To analyze the burn range and measure the time of 2nd and 3rd degree burn using this system." About System: It

Brand Name:Delta

Model Number:VFT

Place of Origin:China

...Test Apparatus Introduction: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test Apparatus is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: VFT ISO 15025 Flexible Materials Vertical Flame Spread Test

Brand Name:Delta

Model Number:VF-1

Place of Origin:China

...Test Apparatus Introduction: VF-1 ASTM D6413 Textile Vertical Flame Resistance Test Apparatus is for measuring the vertical flame spread for children's sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Meet CFR 1615/1616, ASTM D6413 and CALIF TB117. Product Parameters No. Item Name VF-1 ASTM D6413 Textile Vertical Flame Resistance Test

Brand Name:Delta

Model Number:VF-45

Place of Origin:China

VF-45 CFR 1610 Clothing Textiles Flammability Testing Apparatus Introduction: VF-45 CFR 1610 Clothing Textiles Flammability Testing Apparatus provides methods of testing the flammability of clothing and textiles intended to be used for clothing, ...