solid single flute end mill

Brand Name:INMIND

Model Number:8*20*8D*60L*4F

Place of Origin:China

... Solid Carbide End Mills & Tungsten Carbide HRC45 End Mill Type solid carbide R endmills,solid carbide flattened endmills solid carbide ball nose endmills Model Number Various Helix angle 35 °,45° Place of Origin Jiangsu,China (Mainland) Usage Milling ...

Brand Name:RLD Tools

Model Number:HRC55

Place of Origin:China

...Milling Cutters 4 Flutes 5/16" Carbide Square End Mills Tool Product name HRC50 Imperial Milling Cutters 4 Flutes 5/16" End Mill Feature Wide application Suitable for Hardened steel, stainless steel, iron, cast iron, etc. Machine type CNC milling machine Flutes 4 Coating AlTiSiN / customized Helix 35 degree Co 12% HRA 92.2 TRS Min(N/mm²) 4000 Tolerance Within 0/-0.02mm Processing machine ANCA/ Carbide Raw Material Introduction End

Brand Name:SHIELD

Model Number:PM-4E-G

Place of Origin:Hunan China

4-Flute flattened end mills with straight shank High-performance general milling PM series Type Basic dimension(mm) Number of teeth Z Geometry D d H L PM-4E-D1.0S-G 1.0 4 3 50 4 Picture 1 ...

Brand Name:JT

Model Number:JTS

Place of Origin:China

... carbide materials; fine polishing processing. 3, Combine big load chip groove, very sharp cutting edge compared with spiral flutes, can greatly improve production efficiency and quality. We use 100% original raw material, the

Brand Name:INMIND

Model Number:6*15*6D*50L*2F*90º

Place of Origin:China

...solid carbide endmills, 2 / 3 / 4 / 6 Flutes, flat endmills, ball nose endmills, corner radius endmills,for stainless steel endmills, for aluminum alloy endmills, roughing endmills,tapered endmills,Micro-dia endmills, extra long endmills, non-standard endmills,etc. Description: Quick Detail: 0.8um Micro grain size solid carbide Chamfer end mill...

Brand Name:JT

Model Number:JTR2

Place of Origin:China

...Flute End Mill 50mm Overall Length Long Neck End Mill Description: 1. TiAIN coated tungsten carbide end mill 2. Manufacturer price and quality 3. Strict tolerance control We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills...

Brand Name:JT

Model Number:JTR2

Place of Origin:China

... end mills have long usage life lasting in hardened steels. - Every product will inspected by Zoller Machine. We use 100% original raw material, the micro ...

Brand Name:JT

Model Number:JTC

Place of Origin:China

...End Mills for Stainless Steel , 3 or 4 Flute End Mill Description Rough end mill could cut faster and consume less power. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the end mills...

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Jiangsu,Chiang(Mainland)

...Flute Roughing End Mill Material Tungsten carbide TRS >4000 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard. Cutting Form Square,Ball nose, Corner Radius, Taper Flute, etc. Type of flute...

Brand Name:MMM

Model Number:Various

Place of Origin:CHINA

Solid Carbide End Mills for ISO N Copper with Good Lubrication Extraordinary sharpness, most suitable for high precision machining of copper and copper alloys. Feature Advantage: Particularly suitable for processing thin-walled workpieces. The unique geometry allows for maximum metal removal rates. The integral alloy end mill is suitable for face milling, groove milling and side milling with high efficiency advantages. The integral alloy end mill

Brand Name:GREWIN

Model Number:M10.0x1.0

Place of Origin:Zhuzhou

... Coating TiAiCN coating Flute Diameter 1-20mm HRC HRC65 Overall Length 50-150mm Suitable For Inconel, steel,etc. Features: 1. Special Cutting Edge: ...

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Jiangsu,Chiang(Mainland)

...Solid Carbide Drilling Endmill Tungsten Tapered End Mills Material Tungsten carbide TRS >4000 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard. Cutting Form Square,Ball nose, Corner Radius, Taper Flute, etc. Type of flute...

Brand Name:AMG

Place of Origin:CHINA

... for machining aluminum and other non-ferrous materials. Features: 3-Flute Design – Optimized for aluminum, providing efficient chip evacuation and reducing built-up edge (BUE). Carbide Material – High-quality ...

Model Number:HG680

Place of Origin:MADE IN CHINA

Brand Name:KTC

...material, with bending strength of 4600mpa and grain size of 0.2 μm, which is coated with imported Balzers high-performance composite coating. HG680 milling cutters are with special groove design, are especially suitable for high hard material processing.

Model Number:V600

Place of Origin:MADE IN CHINA

Brand Name:KTC

...Flutes End Mill Micro End Milling High Accuracy Full Inspection V600 adopts high-quality high-quality ultra-fine grain tungsten steel material at home and abroad, with bending strength of 4500mpa and grain size of 0.2μm, including micro diameter milling cutter special for steel or aluminum, coating or no coating. The coating adopts AlTiN or TiSiN imported from Switzerland. Micro diameter milling...

Brand Name:JT

Model Number:JTB4

Place of Origin:China

Straight Shank Carbide Milling Cutter Cobalt End Mill Four Flute End Mill Description 1. For side milling and shallow slot milling. 2 Very suitable for high speed cutting and dry cutting. 3.Strict tolerance extent control. We use 100% original raw material...

Brand Name:JT

Model Number:JTB2

Place of Origin:China

...End Mills For Stainless Steel ,Two Flute End Mill Description General Purpose as Coating Suitable for most of materials. Conventional or High Speed Milling, Wet or Dry Cutting. General milling operation, Slotting, Side cutting, Machining die cavity give you increased productivity and decreased tooling cost with satisfaction. Suitable for dry milling...

Brand Name:TS

Model Number:1-16mm

Place of Origin:CHINA

Solid Tungsten Carbide 2 Flutes Chamfering 1-16mm End Mills This end mills is design to chamfer the corener of part into bevel angle, you can choose deffirent bevel angle. for example 30° , 45°, 60°, and so on. It is suitable for steel, stainless steel, cast iron, high temperature alloys and other materials processing. the tungsten carbide material can give the chamfering tool a long life span. Product Name: Solid Tungsten Carbide Chamfering End

Brand Name:SUPAL

Model Number:OEM

Place of Origin:Jiangsu,Chiang(Mainland)

...End Mills For Wood Tools Used For Carpentry Material Tungsten carbide TRS >4000 N/mm2 HRA 91.8-92.4, HRC:45/55/60/65 Grain size 0.2-0.6μm Helix angle 30°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard. Cutting Form Square,Ball nose, Corner Radius, Taper Flute, etc. Type of flute...

Place of Origin:Sichuan, China

Brand Name:KEDEL

Model Number:KD-FSA6075A

...Flute Cnc Bits 6mm End Mill Endmill De Carburo 65 Hrc Fresa De Topo Cut Bit Product Name carbide flat end mill Brand KEDEL Model KD-FSA6075A Coating PVD Material 100% Virgin Grade MC115/MC118/MC118X/MC335 Workpiece Steel/Stainless steel/Alloy steel/Cast Iron/Aluminum HRC HRC 45-65 MOQ 1 Piece Shape of Flute Flat End Flute 2/3/4/5/6 Flute...