stepper motor controller driver

Brand Name:JunQi

Model Number:M860D

Place of Origin:China

...-current chopper driver technology, it shows stable operation, provides excellent high torque. Moreover, it significantly reduces the noises and vibration of the operating motor. The M860D has the feature of low-noise, low-vibration and low-heating. The

Brand Name:JSS-MOTOR

Model Number:86HSE8N-BC38 + HSS86

Place of Origin:CHINA

...stepper motor and driver 8.5N.m step servo motor and step servo driver Size: 86*86mm (nema 34) Step Angle: 1.8° Temperature Rise: 80℃ Max Ambient Temperature: -20℃-- +50℃ Insulation Resistance: 100MΩMin, 500VDC Dielectric Strength: 500VAC for 1 minute Holding torque: 8.5N.m Encoder line: 1000 lines Suitable driver: HSS86 Closed Loop Stepper Motor and Driver...

Brand Name:JIUQI

Model Number:JQ-201SD

Place of Origin:Jiangsu, China (Mainland)

...Stepper Motor Driver For Marking Machine 1. Description: * Ultra-low vibration noise * Built-in 232/485/CAN bus interface * Automatic parameter setting function, baud rate can be set * Precision current control reduces motor heat * Support software to set a variety of parameters and rich protocol control * Compatible with long instruction and short instruction control * Can drive 4/6/8 line two phase, 4 phase stepper

Brand Name:JIUQI

Model Number:JQ-201SD

Place of Origin:Jiangsu, China (Mainland)

...Stepper Motor Driver For Marking Machine 1. Description: * Ultra-low vibration noise * Built-in 232/485/CAN bus interface * Automatic parameter setting function, baud rate can be set * Precision current control reduces motor heat * Support software to set a variety of parameters and rich protocol control * Compatible with long instruction and short instruction control * Can drive 4/6/8 line two phase, 4 phase stepper

Brand Name:Jkongmotor

Model Number:JK86HS155-4208

Place of Origin:Jiangsu, China (Mainland)

.... Nema 34 high torque stepper motors deliver great value with no quality sacrifice. These motors are engineered to provide the highest possible torque but minimize vibration and audible noise. NEMA (National Electrical Manufacturers Association) 34 is a

Brand Name:JSS-MOTOR

Model Number:3DM860D

Place of Origin:CHINA

3-phase stepper motor driver for nema 34 1.2 step angle step motor 24-80VDC 3-phase stepper motor driver: Features 1. 3-phase digital stepper driver, adoption of 32-bit DSP technology 2. Low-noise, low-vibration and low temperature rising 3. Voltage 24-...

Brand Name:ZEROONE-Control

Model Number:IC57 Integrated Stepper Motor

Place of Origin:China

...all-in-one actuator that combines a 57-series stepper motor with a drive module. Featuring precision control, compact design and easy deployment as its core advantages, it is widely suitable for various automation scenarios. With a standard flange size of

Brand Name:Jkongmotor

Model Number:JK0220

Place of Origin:Jiangsu, China (Mainland)

12V~36VDC 0.25A-2.0A Stepper Motor Driver JK0220 For Nema8 - Nema17 Stepper Motor Characteristics of 2phase stepper motor driver: 1. DC power input type:12V~36VDC , 2.Output current:0.25A-2.0A Mircostepping:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64,1/128 ...

Brand Name:Jkongmotor

Model Number:JK57HS56-2804

Place of Origin:Jiangsu, China (Mainland)

...Stepper Motor With Driver 12v 24v 36v 2.8A 1.26N.M 2N.M 3N.M Used For CNC Milling Machine NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate and 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque of 19 kg-cm. NEMA 23 Stepper motor is generally used in Printers, CNC machine, Linear actuators and hard drives. This is the strongest model for Nema 23 stepper

Brand Name:UIrobot

Model Number:UIM241

Place of Origin:CHINA

...stepper motor motion controller UIM241XX controller are miniature stepper motor controllers with RS232 control interface. The user device controls the UIM241XX through RS232 using ASCII coded instructions. UIM241XX controllers support open-loop and quadrature encoder (QE) closed-loop control. The UIM241XX architecture comprises communication, basic motion control...

Brand Name:Jkongmotor

Model Number:DM542

Place of Origin:Jiangsu, China (Mainland)

DM542 step drive digital 18V~60VDC Nema17/23 stepper motor controller Overview: Average current control, 2-phase sinusoidal output current drive 8 channels output phase current setting Offline command input terminal High ...

Brand Name:Jkongmotor

Model Number:nema 23 integrated servo stepper motor

Place of Origin:Jiangsu, China (Mainland)

...Stepper Motor With Driver 56 / 80mm CANopen CiA402 The STM fused step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. With the controller, STM has more control options, and stall detection and stall prevention functions. JKONGMOTOR's ISM57 Series Integrated Motor...

Brand Name:JSS-MOTOR

Model Number:28HS45

Place of Origin:CHINA

... as a hybrid motor. The working principle of a hybrid motor is, the rotor in this motor is magnetized axially similar to a permanent magnet stepper motor, whereas the stator is energized electromagnetically similar to a variable reluctance stepper motor.

Brand Name:Jkongmotor

Model Number:JK42HS40-1704-13A

Place of Origin:Jiangsu, China

...motor 8.5N.m with step driver Size: 86*86mm (nema 34) Step Angle: 1.8° Temperature Rise: 80℃ Max Ambient Temperature: -20℃-- +50℃ Insulation Resistance: 100MΩMin, 500VDC Dielectric Strength: 500VAC for 1 minute Holding torque: 8.5N.m Encoder line: 1000 lines Suitable driver: HSD86 Closed Loop Stepper Motor and Driver...

Place of Origin:China

Brand Name:Sutai

Model Number:ST-42H

... terms: T/T, L/C, PayPal, Western union Supply ability: 100,000 pieces/month Color: black Product designation: step motor driver is an electronic device designed to operate with 2 or 4-phase stepper motor with maximum current per

Place of Origin:China

Brand Name:Sutai

Model Number:ST-57H

... terms: T/T, L/C, PayPal, Western union Supply ability: 100,000 pieces/month Color: black Product designation: step motor driver is an electronic device designed to operate with 2 or 4-phase stepper motor with maximum current per

Brand Name:JSS-MOTOR

Model Number:86HSE4N-BC38 + HSS86

Place of Origin:CHINA

... NEMA 34 Cnc Stepper Motor With Driver Low noise, good dynamic characteristic, good quality and reliable. The same dynamic response speed with servo motor, but cheaper than servo motor. Closed Loop Stepper Motor and Driver: Features: 1. Position error...

Brand Name:Casun

Model Number:86HSE4N+HBS860H

Place of Origin:CHINA

... Mach3 CNC kit. The 86mm Hybrid Stepper Motor Series offers powerful holding torque in various sizes. Use with a microstepping driver to reduce vibration and achieve higher step resolution. High torque and high precision Ideal for high-tech industry and

Brand Name:JunQi

Model Number:DM860A

Place of Origin:China

DM860A 2 phase Digital Hybrid stepper motor driver Features 1. 2phase digital stepper driver, adoption of 32-bit DSP technology 2. Low-noise, low-vibration and low temperature rising 3. Voltage 36-110VDC or 24-80VAC 4. With 8 stalls output current setting...