sterility test method

Brand Name:Advanced Instruments

Model Number:COC-A

Place of Origin:China

...Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.The Open Cup Flash Point Testing Machine is applicable to all petroleum products with flash points above 79ºC and below ...

Brand Name:DAXIAN

Model Number:DX8362

Place of Origin:China

...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states eventually use this, instead of the traditional regulatory methods...

Brand Name:DAXIAN

Model Number:DX8362

Place of Origin:China

...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states eventually use this, instead of the traditional regulatory methods...

Brand Name:Advanced Instruments

Model Number:AIC-1384

Place of Origin:China

... standard SH/T 0085 "Test Method for Corrosion of Engine Coolants (Glassware Method)". It is applicable to the determination of the corrosive effect of engine coolants on typical metal test specimens under controlled laboratory conditions. It is

Brand Name:Advanced Instruments

Model Number:AIC-510D

Place of Origin:China

...Low Temperature Pour Point and Cloud Point Test instrument is designed and made as per GB/T3535 "Standard Test Method for Pour Point of Petroleum Oils" and GB/T6986 "Standard Test Method for Cloud Point of Petroleum Oils" in the ...

Brand Name:YUYANG

Model Number:YY001

Place of Origin:CHINA

... device, fitted with pre-determined counter. Standards ASTM D1907 Textile Testing Equipment Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method ASTM D2260 Tables of Conversion Factors and Equivalent Yarn Numbers Measured in

Brand Name:CHENGFENG

Model Number:CF9302

Place of Origin:China

...Test Methods for Measuring the Dielectric Constant and Dielectric Loss Factor of Electrical Insulating Materials at Power Frequency, audio Frequency and High Frequency (including meter wave length)" (equivalent to IEC 60250), and complies with test methods such as JB 7770. It is applicable to the testing...

Brand Name:Advanced Instruments

Model Number:AIC-2806

Place of Origin:China

...Test Methods for Softening Point of Petroleum Asphalt of National Standard of People's Republic of China , T0608 Asphalt Softening Point Test (Ring-and-Ball Apparatus) in the Industrial Standard of People's Republic of China JTJ052 Specification and Test Methods...

Brand Name:Advanced Instruments

Model Number:AIC-21030

Place of Origin:China

... flame-resistant time standard and international automotive cable standards of low-voltage cables for automobiles unshielded horizontal flame test methods. lt is used for performance assessment of cable under fire conditions. Test method: Fix the two

Brand Name:Advanced Instruments

Model Number:AIC-1384

Place of Origin:China

... SH/T 0085 "Test Method for Corrosion of Engine Coolants (Glassware Method)". It is applicable to the determination of the corrosive effect of engine coolants on typical metal test specimens under controlled laboratory conditions. It is suitable for both

Place of Origin:Guangdong, China

Brand Name:LONROY

... permeability of various types of geotextiles. Its performance complies with the requirements of the "Test Method for Water Permeability of Geotextiles" standard in ASTM D4491-2017 Method A - Constant Head Test, and under specified conditions, it

Brand Name:LONROY

Place of Origin:Guangdong, China

...Test Instrument Anti-Scratch Performance Detector Coating Scuff Tester Introduction The GA-ER109 Multifunctional Scratch Tester is a testing instrument independently developed and manufactured by our company. It integrates two scratch testing methods commonly used in the automotive industry—the cross-hatch (grid) method and the five-finger method...

Model Number:SL-SF12

Brand Name:SKYLINE

Place of Origin:China

...Test Machine ISO12870 45 Degree Product Overview The SL-SF12 Spectacle Frame Torsion Tester is engineered according to the technical specifications of GB/T14214-2003 "General Requirements and Test Methods for Spectacle Frames" and ISO12870:1997 "Ophthalmic Optics - Spectacle Frames - Basic Requirements and Test Methods...

Place of Origin:China

Brand Name:SKYLINE

Model Number:SL-OA22A

... used to evaluate the shear stability of lubricating grease through the roller test method, measuring the change in penetration after rolling. Key Features Standards Compliant: Test method per ASTM D1831 Updated Design: Improved structure and control for

Categories:Rubber Testing Equipment

Country/Region:china

... than 1000 V – Definitions, test methods and acceptance criteria GB/T 22079-2008, Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1000 V – General definitions, test methods and acceptance criteria Guidelines for

Brand Name:LONROY

Model Number:LR-Z231

Place of Origin:Guangdong, China

... accepted testing methods to measure the air permeability of paper, paperboard, and other sheet materials. It is a fully automated instrument controlled by a single-chip microcomputer. The testing methods comply with various standards—including Schopper,

Brand Name:JIEDONG

Model Number:JD-6016B

Place of Origin:Guangdong, China

...-6016B Product description and use: Test standard: This instrument complies with JIS-K6754, A5430 test standard Scope of application: Suitable for fastness test of plastic, ceramic, fiberglass and other materials Test method: This machine test method is to

Brand Name:ATMARS

Model Number:AH-100 SERIES

Place of Origin:Guangdong, China

...Testing Test Standards Conformance GB/T 10586-2006 Specifications for damp heat chambers GB/T 10592-2008 Specification for low/high temperature test chambers GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test

Brand Name:ATMARS

Model Number:AH-100 SERIES

Place of Origin:Guangdong, China

...Testing Test Standards Conformance GB/T 10586-2006 Specifications for damp heat chambers GB/T 10592-2008 Specification for low/high temperature test chambers GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test

Brand Name:HOOHA

Model Number:ZY6239A

Place of Origin:China

...test method can be used to measure the flame retardancy of the elastic non-woven ground layer (such as refractory rubber coating, refractory polyethylene asbestos tile and fire-proof linoleum). Meet the standard: In accordance with GB/T 1241-2005 (appendix C), the METHOD of "FLOOR COVERINGS, RESILIENT, NONTEXTILE: SAMPLING AND TESTING", METHOD 6411 "FIRE RESISTANCE" standard. Main parameters: The flame retardant test