tapered button bit for mining

Brand Name:MIROC

Model Number:11 degree Tapper button Bit

Place of Origin:China

...type bits if the goal is to minimize hole deviation in small hole range drilling. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit from spinning. Used in drifting and

Brand Name:MIROC

Model Number:Tapered button bit

Place of Origin:China

tapered button drill bit 7 buttons OD 34mm 36mm 38mm What can you get from KSQ? 1. Good service for the products purchased 2. Good quality control of products produced 3. Reasonable prices for the products offered 4. Best advices based on the experience and knowledge of well know what to do and how to do Product Description Bit diameter: 32mm to 42mm Body height: 50mm, 55mm,60mm Taper...

Brand Name:MIROC

Model Number:64mm-12 DEG

Place of Origin:Shangdong,China

...Bit With Buttons For Construction 1) Thread connection: R25, R28, R32 2) Steel material: 45CrNiMoV. 3) Suitable carbide tips. 4) Bits diameter: 64-127mm. Specifications PIC. Model Dia. Gauge button front button taper A 6° Taper reaming button bits (shperic or parabolic buttons...

Brand Name:MIROC

Model Number:64mm-12 DEG

Place of Origin:Shangdong,China

...Bit With Buttons For Construction 1) Thread connection: R25, R28, R32 2) Steel material: 45CrNiMoV. 3) Suitable carbide tips. 4) Bits diameter: 64-127mm. Specifications PIC. Model Dia. Gauge button front button taper A 6° Taper reaming button bits (shperic or parabolic buttons...

Brand Name:SUVEC

Model Number:tapered drill bit

Place of Origin:China

...Bits Ballistic Button Bit Long Skirt Tapered drill bits are Ideal for small short hole drill & blast, as well as roof bolting applications, our hand-held system is comprised of premium alloy tapered hexagonal drill steels ranging from 0.5 m up to 7.9 m in length, and complimented by a complete range of reamers, blade and button bits. Product Name: Rock Core Drill Bits Ballistic Button Bit Long Skirt for tapered

Brand Name:MING

Model Number:BIT65mm-CIR65

Place of Origin:CHINA

Product name: Diameter 65mm DTH button drill bit CIR65 shank for blasting Product category: DTH drill tools Matched hammer: Hammer CIR65 Diameter: 65mm KINGDRILLING DTH button bit description: KINGDRILLING hammer bits are used with Down-the-hole hammers...

Brand Name:Super Diamond

Model Number:T60

Place of Origin:China

...-leading strength and penetration rates for more productivity so that get max. drilling performance for rock drills with long life. Besides, we can design customized thread button drill bits according to different drilling application and

Model Number:T60

Place of Origin:China

Brand Name:Super Diamond

...-leading strength and penetration rates for more productivity so that get max. drilling performance for rock drills with long life. Besides, we can design customized thread button drill bits according to different drilling application and

Brand Name:ROSCHEN

Model Number:GT60 140MM

Place of Origin:CHINA

Button Bits GT60 140mm, GT60 Rock Drilling Bits used for Crawler Drill Rig Quarry Drilling Roschen Rock Drilling Products includes: Rock tools, tapered button bits, threaded button bits, DTH bits, DTH hammers, DTH drill pipes, dshank adapter, coupling sleeves, integral drill steels, tapered drill rod, extension rod, speed rod, MF rod, cutter bits...

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

32mm 42mm Hex 22 Hex 25 Tapered Diamond Tip Masonry Drilling Bits Tungsten Carbide Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit bac...

Brand Name:Kinglong

Model Number:Tapered Button Bits

Place of Origin:Wuhan

...Tapered Button Bits are connected with the tapered rods through taper to finish drilling work. The Tapered Button Bits are mainly used in the fields of secondary crushing, anchor rod support, tunneling, etc. The features 1. Raw material: alloy steel and tungsten carbides by heat forging treatment 2. Buttons...

Brand Name:SHITAN

Model Number:ST

Place of Origin:HEBEI CHINA

... efficiency,longer service life,better powder-discharge,better wear-resistance and impact-resistance,easier bit-back performance etc.,widely used in metal mine,quarry,tunneling,hydro-electrical engineering and so on. Features A.Independently researched and

Brand Name:Jinquan

Model Number:T38 T45 T51

Place of Origin:China

..., T60, ST58, ST68 etc). 2. We can offer you all face design, flat face, drop-center face, normal body and retrac body. <button bits, chisel bits, cross bits, dth bits, dth hammer, dth drilling, drill bit, drill rod, tapered bit, thread bits,

Brand Name:MIROC

Model Number:tapered button drill bit

Place of Origin:China

... 11°, 12°; Shank sizes: Hex. 19mm, Hex, 22mm and Hex. 25mm; Buttons configuration: 4 buttons, 5 buttons, 6 buttons, 7 buttons, 8 buttons, 9 buttons; TAPERED ROCK DRILLING TOOLS - 7° Drill Bit Bit Dia. Buttons and Size (mm) Flushing Hole Weight Part

Brand Name:MTH

Model Number:38mm

Place of Origin:CHINA

...-hard to hard and abrasive rock formation, a wide taper angles is nomally used. Taper angles of 11° and 12° are normally used on modern drill rigs. For low impact rock drills and softer rock formation, a narrow taper angle of 7° is used. 7° can also

Brand Name:OED/OEM

Model Number:T45 T51

Place of Origin:China

Threaded drill bits T45 T51 Cross Bit for mining machine parts Features 1.Material:35crmov 2.Flushing Holes:2 3.Taper Degree:6°,7°,11°,12° 4.Carbide Length:0.5mm Longer Than Other Manufacturer So The Carbides Won't Fall SPECIFICATIONS FOR THREAD CROSS BIT ...

Brand Name:SUVEC

Model Number:Tapered Cross Bit

Place of Origin:China

...Bits For Rock And Concrete , Tapered Cross Bit Tapered drill bits are Ideal for small short hole drill & blast, as well as roof bolting applications, our hand-held system is comprised of premium alloy tapered hexagonal drill steels ranging from 0.5 m up to 7.9 m in length, and complimented by a complete range of reamers, blade and button bits. (1) Taper angle: 4°,4°46″,6°,7°,11°,12° (2) Models:chisel/cross/button

Brand Name:OED/OEM

Model Number:T45 T51

Place of Origin:China

Threaded drill bits T45 T51 Cross Bit for mining machine parts Features 1.Material:35crmov 2.Flushing Holes:2 3.Taper Degree:6°,7°,11°,12° 4.Carbide Length:0.5mm Longer Than Other Manufacturer So The Carbides Won't Fall SPECIFICATIONS FOR THREAD CROSS BIT ...

Place of Origin:China

Brand Name:MIROC by KSQ

Model Number:11 Degree

...Tapered Drill Bits Description Our Tapered drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized tapered button drill bits...