transformer core material

Brand Name:CENTERSKY

Model Number:EI 30---EI 600

Place of Origin:JIANGYIN

...Transformer Gap Lamination EI Core Lamination These laminated transformer core are largely utilized in transformers, generators, household motors and micro-motors. Introduction: EI core with gap lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-30 to EI-360.The gap sizes of transformer lamination core...

Brand Name:TIGER

Model Number:EFD34

Place of Origin:CHINA

SMD Type EFD34 Multiple Output Single Phase Ferrite Core High Frequency Transformer Features: • Core mounted Horizontal or Vertical • Hipot voltage:2500Vrms • Ferrite core material • High-temperature resistant • High efficiency of over 95% • ...

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

...TRANSFORMER EI CORE LAMINATION EI lamination cores are most often used in transformer manufacturing. In DIN EN 60740-1 (formerly DIN 41 302), standardised EI sheets are divided in to waste-free and low-waste types. Three-phase EI core is made by the silicon steel strip. The model of EI lamination in standard sizes is from 3PEI-17.5 to 3PEI-120.The gap sizes of the transformer lamination core can be customized. EI Core...

Brand Name:Jiachen

Model Number:D10

Place of Origin:China

...; we could also provide our customers with single phase wound cores like D9, D10, D11 etc., three phase wound cores; The capacity range from 10KVA to 2500KVA; Due to its particular technology craft, its performance is better than traditional stacked cores,

Brand Name:STT

Model Number:ZZ300

Place of Origin:China

... cutting equipment to cut silicon steel to make transformer core centre pillar. The automatic core cutting machine can be used to cut the silicon steel with maximum thickness 0.35mm and the maximum width 300mm. The core cutting machine is provided with

Brand Name:STT

Model Number:ZZ400

Place of Origin:China

...Core Cutting Machine Making Center Leg For Transformer core Description of core cutting machine ZZ400 Automatic core cutting machine ZZ400 is a special cutter for cutting silicon steel strip and the cut strip can be used as center leg of transformer core. The core cutting machine can cut the silicon steel strip and the thickness of the strip is from 0.2mm to 0.35mm and maximum width of the silicon steel strip is 400mm. The core...

Brand Name:STT

Model Number:ZZ400

Place of Origin:China

...Core Cutting Machine Making Transformer Core Center limb Description of core cutting machine ZZ400 Automatic core cutting machine ZZ400 is a special cutting equipment for cutting silicon steel strip to make center limbs of transformer cores. The core cutting machine can cut the silicon steel strip with thickness from 0.2mm to 0.35mm and the maximum width of the silicon steel strip is 400mm. The core...

Brand Name:Tiger

Model Number:RFT-001SG

Place of Origin:China

High Quality Transformer RoHS Compliant For a Broad Range of RF Description Core mounted Horizontal or Vertical Hipot voltage:2500Vrms Ferrite core material Custom designs available Applications Rate current @40℃ TYP temperature rise Ideally used as ...

Brand Name:SEFIE

Model Number:BH-40

Place of Origin:Wenzhou,China

...o the iron core evenly. There is neither primary bus nor device for fixing bus. And the whole iron core is secured by two clamps. This product conforms to IEC60044-1 and GB1208-2006 standard. Model Rated Current(A) Busbar Hole Dimension Rated ...

Brand Name:Tiger

Model Number:SR001001153

Place of Origin:China

High Frequency Transformer EF25/13/7-623uH+7% Electronic Components Description • Core mounted Horizontal or Vertical • Hipot voltage:2500Vrms • Ferrite core material • Custom designs available Applications • Rate current @40℃ TYP temperature ...

Brand Name:SEFIE

Model Number:BH-40

Place of Origin:Wenzhou,China

...o the iron core evenly. There is neither primary bus nor device for fixing bus. And the whole iron core is secured by two clamps. This product conforms to IEC60044-1 and GB1208-2006 standard. Model Rated Current(A) Busbar Hole Dimension Rated ...

Brand Name:CENTERSKY

Model Number:EI 30---EI 600

Place of Origin:JIANGYIN

... the current. if the core is one component, its size is wide and thus small, which reduces losses due to a greater current. Introduction: EI core with gap lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from

Brand Name:STT

Model Number:HJX400-LL

Place of Origin:China

... Two Punching Cutting Machine Making Transformer Core Description of cutting machine HJX400-LL Two cutting and two punching cutting machine HJX400-LL is for cutting silicon steel strip to make transformer iron core. The cutting machine ‘s transverse ...

Brand Name:STT

Model Number:ZJX1250

Place of Origin:China

Core Slitting Machine Making Silicon Strip For Transformer Core Description of core slitting machine ZJX1250 Core slitting machine ZJX1250 is a special equipment for cutting silicon steel sheet to make different widthes of strips. With cut to length line, these strips can be cut again to make transformer core's outer legs, center legs and VN yoke. The core...

Brand Name:AUTOFOR

Model Number:ATF171101

Place of Origin:China

Abrasive cutting machine for Large iron core electric transformer core ATF171101 mainly for large-scale iron core electric transformer, Multi-tool spindle, using 11KW motor, upper and lower cutting method, high efficiency, Panasonic servo feeding, ...

Brand Name:STT

Model Number:ZZ400

Place of Origin:China

... equipment for cutting silicon steel strip to make center leg of transformer core. The core cutting machine can cut the silicon steel with thickness from 0.2mm to 0.35mm and maximum width 400mm. The cutting machine is provided with a decoiler, which can be

Brand Name:CENTERSKY

Model Number:EI-96

Place of Origin:JIANGYIN,CHNA

...transformer core EI-192 ei lamination core A single-phase transformer can operate to either increase or decrease the voltage applied to the primary winding. When a transformer is used to increase the voltage on its secondary winding with respect to the primary, it is called a step-up transformer...

Brand Name:CENTERSKY

Model Number:EI-205

Place of Origin:JIANGYIN,CHNA

... to the primary winding. When a transformer is used to increase the voltage on its secondary winding with respect to the primary, it is called a step-up transformer. When it is used to decrease the voltage on the secondary winding with respect to the

Brand Name:STT

Model Number:ZJX1250

Place of Origin:China

...Transformer Core Slitting Machine Making Steel Strip Description of core slitting machine ZJX1250 Automatic transformer core slitting machine ZJX1250 is for cutting coiled silicon steel into several silicon steel strips with a set width. The cut strips can be wound into coils. The slitting speed of the core slitting machine can be adjusted as requested. The machine is very easy to be operated. Quick details of core...

Brand Name:STT

Model Number:ZJX1250

Place of Origin:China

...steel sheet for making different width strips. The width of cut strip can be preset. The slitting speed of the core slitting machine can also be set. The cut strip can be wound to coil. It is very easy to operate the core slitting machine. Quick details of