tunneling taper button bit

Brand Name:MIROC

Model Number:4148300158

Place of Origin:China

...Bits Short Skirt 7 Degree 32-50mm Button Bit Product Description: Tapered button bit is widely used in underground mines and construction projects. Our taper button bits are made of Alloy steel and Tungsten carbide.Our button bits diameters are from 30mm to 42mm, and different type are available, such as tapered...

Brand Name:MIRCO

Model Number:Tapered Button Bit

Place of Origin:China

...Tapered Button Bit Used Drifting And Tunneling Taper Button bits MirocTapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Drillers choose tapered button bits for faster drilling penetration rate. Different taper sizes have different characteristics when it comes to the smaller angle will prevent the bit from spinning. Taper button bit...

Brand Name:MTH

Model Number:38mm

Place of Origin:CHINA

...Button 7 Degree Mining Drilling Button Drill Bits Tapered Button Bit Description: The Tapered Button Bits are connected with the tapered rods through taper to finish drilling work. The Tapered Button Bits are mainly used in the fields of secondary crushing, anchor rod support, tunneling, etc Product Characteristic: Specification for drill Bit Material Carbon Steel Application gold mine, railway, tunnel...

Brand Name:MING

Model Number:MZ0741-11

Place of Origin:CHINA

...Tapered Rock drill tools for tunneling Product category: DTH taper drill bit Matched connection: 11 degree taper Diameter: 41mm KINGDRILLING DTH taper drill bit description: Taper button bit as small hole bit is different with thread button bit as long hole bit to use taper rod to be used for air leg or hand held jack hammer driller in quarrying,and mining. (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

..., road, gas line, pipe and trench projects, quarry work, rock anchoring and ground stabilization projects, water well industry, etc. Taper Degree: 6°, 7°, 11°, 12°

Brand Name:SOLLROC

Model Number:32mm-43mm

Place of Origin:China

.../32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits:28/29/30/32/33/34/35/36/37/38/40/41/42/45mm Taper Angle (Degree):4 degree/ 6 degree/ 7 degree/

Brand Name:OED/OEM

Model Number:36mm

Place of Origin:China

... Quarry, Gold Mine, Railway, Tunnel, Etc. For Drilling Packaging & Delivery Single package wooden box size:10X5X5 cm Single weight: 0.4 kg Package Type: ...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... drill bits with a wide selection of head diameters from 26mm to 48mm . With carbide buttons hot pressed on the bit skirts , tapered button bits have a good drilling performance and are excellent in longevity . We manufacture various tapered button bits in

Brand Name:Super Diamond

Model Number:R32

Place of Origin:China

...Button Bit R32 Threaded Drill Bits Threaded Drill Bits cover regular, retrac and reaming types. With stronger button-fixing ability, longer service life, better wear-resistance and impact-resistance performance, they are widely used in tunneling, underground mining, open pit mining, anchoring and other large-scale construction projects. Thread button drill bits...

Brand Name:JCDRILL

Model Number:36mm

Place of Origin:China

... bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits...

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

... primary drilling time and higher drilling efficiency, so that the button bit is popular among the users. Our taper button bit is made of high quality raw material through special heat treatment, which ensures the high drilling performance. At present,

Brand Name:Glorytek

Model Number:option

Place of Origin:China

...Tapered Carbide Button Bits Button bits are widely applied in Hand Hold drilling system for dimensional stone quarrying.Made with high quality of raw material through special heat treatment. Tapered button drill bit size: from 32mm-42mm, tapered 4, 5, 6, 7, 11 and 12 degree, with 4, 5, 6 and 7 buttons. Thread button drill bit...