ultrasonic testing method

Brand Name:GT SONIC

Model Number:GT SONIC-ST105A/B

Place of Origin:China

...Ultrasonic Cleaner 28KHZ Ultrasonic Parts Cleaner GT SONIC Industrial Large Ultrasonic Cleaner Machine are designed, manufactured and tested at our company factory located in Meizhou, Guangdong China. Ultrasonic cleaning, in general, provides a favorable return on investment when compared to your existing conventional cleaning methods. The least expensive Ultrasonic...

Brand Name:SINOWON

Model Number:SVR-110H

Place of Origin:Dongguan, China

... to make hardness testing at the spot. ● SVR-110 is a NDT durometer due to the contact indention is too small to observe, it is one of the excellent solution to test hardness of finished products, such as, the mold, gear, shaft, rod, screw, rails,

Brand Name:SAMYON

Place of Origin:CN

Model Number:SY-6360

..., it can test 6sections in one time. It can be used to test the large diameter piles with more than 4pcs sonic tubes. It can also be used for testing the DWALL defect. With the strong probe signal, the probe can test the space up to 8m between the two

Brand Name:HUATEC

Model Number:HUH-6M

Place of Origin:China

...convert like Leeb or Shorehardness tester. The conversion error is eliminated. 2.High test speed -- output test results within seconds 3.Standard Vickers indentation, tiny indentation, little damage to the workpiece 4.The test results are related to the

Brand Name:SAMYON

Place of Origin:CN

Model Number:SY-6380

...Ultrasonic Pile/DWALL Testing System for large diameter bored pile integrity testing Applications: With 5pcs probes, it can test the cast-in-place pile with 5pcs sonic tubes in one time, so the testing sections will be 8sections(one sonic tube is in the center), and 10sections(all the sonic tubes are in one circle). It can greatly improve the efficiency of detection and save the testing time, and this method...

Place of Origin:XIAMEN,china

Brand Name:COBE

...workpiece willl move to the testing area, then pipe rotated ,probes move right and left ; When find defects, the instrument will automatic alarm, at the same time it will display the flaw signal; record and analyse the test results , automatic sort the

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

..., crack depth and defect detection; * Diaphragm wall integrity detection; * Geological survey, rock mass integrity, weathering evaluation test; * Mechanical performance testing of non-metallic materials such as

Brand Name:TMTeck

Model Number:8 step test blocks

Place of Origin:China

...test block Wedge Testing Ultrasonic Test Block 1018 steel Ultrasonic thickness gauge Metric 8-step thickness and linearity calibration block. This block comes in thicknesses of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, and 8.0mm. Step face measures 15mm x 15mm. Model PIC Description 8 Step Test Block S-8-MM MM,1018 steel, 8step test...

Brand Name:HUATEC

Model Number:TG5500DL

Place of Origin:CHINA

...method TG5500DL Series Ultrasonic Thickness Gauge Usage Widely used to measure the thickness of metal materials. Especially display its advantage for measuring the thin piece and high precision measuring. What’s more, it can also through the thin coating layer and paint layer, and also be used to measure ultra thin wall with paint layer like fire extinguisher. Main Functions 1.Unique Multiple-wave check method...

Brand Name:limplus

Model Number:CE-4500

Place of Origin:China

... solution to resolve the bacterias and portein. But this method can't clean the contact lens thoroughly for month, quarter, half year, then more and more proteins stays, BAD for our eyes for long time. ULTRASONIC cleaning method use high frequency with the

Brand Name:FUNSONIC

Model Number:FSM-5005-R

Place of Origin:China

... in recent years, which uses ultrasonic waves to atomize melted metal into powder. The solder powder (such as indium powder) prepared by ultrasonic atomization process has good sphericity, narrow particle size distribution, and low oxygen content. The

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:IIW V1

ultrasonic test block,Calibration Blocks, Test Blocks, A2 UT Blocks, standard test blocks iiw,BS2704 Standard ISO2400-1972 ISO2400 2012 Calibration Blocks/Standard Test Blocks/ UT Blocks Order Code Shape (Not to Scale) Type Description /Application ...

Place of Origin:XIAMEN,china

Brand Name:COBE

...Testing System Instruments passed the european standard : EN1711-2000 Eddy Current impedance plane analysis of the weld testing Produce COBE- ETP0202 Weld crack detector , as a new testing method based on the electromagnetic theory , is the breakthrough of COBE engineers after years of industrial and laboratory studies. It solves the complex ultrasonic processing problem with its fast testing

Brand Name:Skymen

Model Number:JP-030S

Place of Origin:Shenzhen, China

4.5L Ultrasonic Cleaning Machine 180W for Milk tea straw / Glass Applicator 40KHz Ultrasonic cleaning methods are more common than conventional cleaning methods, especially the surface of the workpiece is complex, such as some surface irregularities, ...

Brand Name:HJ

Model Number:AM0038

Place of Origin:China

... filtration simultaneously. It can collect the filter samples on the filter surface, reduce the retention time of particles; subvert the traditional manual cleaning method, standardize the

Place of Origin:XIAMEN,china

Brand Name:COBE

... detector , as a new testing method based on the electromagnetic theory , is the breakthrough of COBE engineers after years of industrial and laboratory studies. It solves the complex ultrasonic processing problem with its fast testing processing and no

Brand Name:HUATEC

Model Number:90° Curved 5-Step Block

Place of Origin:China

Ultrasonic Calibration Block 90° Curved 5-Step Block for thickness and linearity calibration of curved surface Specifications: Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing...

Brand Name:HUATEC

Model Number:Mini IIW 2 calibration test block

Place of Origin:Beijing

...calibrating ultrasonic test equipment used in ultrasonic testing with ultrasonic technology. HUATEC brand ISO/DIS 19765 block material: carbon steel 1018, stainless steel 304/316, ...

Brand Name:TMTeck

Model Number:step test blocks

Place of Origin:China

...,1018 steel,5step pipe test block thickness :2.5mm/5mm/10mm/15mm/20mm specification:25mm’*120°α length:100mm INCH,1018 steel, 5step pipe test block thickness:0.100” 0.200” 0.300” 0.400” 0.500” specification:1”*120°α length:4” ​

Brand Name:SINOWON

Model Number:SU-340T

Place of Origin:Gongguan, China

...Ultrasonic Hardness Tester (Tube Hardness Tester,Inner Wall Hardness Tester) SU-340T SU-340T Introduction: l SU-340T Shorten Ultrasonic Hardness Tester is a special manual portable durometer with shorten probe HP-1T made by Sinowon group. It applies method of ultrasonic contact impedance to make hardness testing...