variable connection wireline tool string

Brand Name:XITAN

Model Number:BQ,NQ,HQ,PQ

Place of Origin:Jiangsu，china

BQ,NQ,HQ,PQ wireline drill rods Description of wireline drill rod: This wireline drill rod is main part that connect the drilling rig with diamond bits. Wireline rod features good wear resistance, optimal tensile strength capacity and good torsional ...

Brand Name:XITAN

Model Number:BQ,NQ,HQ,PQ

Place of Origin:Jiangsu，china

BQ,NQ,HQ,PQ wireline drill rods Description of wireline drill rod: This wireline drill rod is main part that connect the drilling rig with diamond bits. Wireline rod features good wear resistance, optimal tensile strength capacity and good torsional ...

Brand Name:Linkai

Model Number:SLW

Place of Origin:NINGBO

... connector Mesh Sock Joint ONE HEAD TYPE The one head type temporary mesh sock joints are specifically designed to temporarily connect the aluminum, steel, or copper conductor to the pulling rope. They consist of variable pitch steel wires,

Brand Name:VCTSY

Model Number:JDC1375

Place of Origin:China

...Tool(JDC Tool, JDC1375 ) JDC Series Tool is a wireline tool used for fishing and running other tools. It can be equipped with standard supporting wireline tools to achieve the running and fishing of subsurface tools. Technical parameter Code JDC1375 Connecting...

Brand Name:VCTSY

Model Number:JDC1375

Place of Origin:China

...Tool(JDC Tool, JDC1375 ) JDC Series Tool is a wireline tool used for fishing and running other tools. It can be equipped with standard supporting wireline tools to achieve the running and fishing of subsurface tools. Technical parameter Code JDC1375 Connecting...

Brand Name:Ruixin

Model Number:2inch 2.5inch

Place of Origin:China Baoji

... off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 2inch 2.5inch.3inch,4inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I.Introduction JD pulling tool is a fishing tool that can be used to launch and salvage tools or instruments with external salvage necks (such as prong, plugs, pressure gauges, etc.). It can knock down and release your hand. It can be divided into JDC, JDS and JDL according to different grip distances. II.General Technical Parameters Size Actual OD FN Bottom Connection...

Brand Name:Ruixin

Model Number:1.25inch-2inch

Place of Origin:China Baoji

..., restrictors, etc.). It can be released with an upward shock. II.Technical Specifications Actual outer Diameter Fishing Neck Connecting Thread Diameter 1.25＂ 1.68＂ 1.187＂ 15/16UN 1＂ 1.5＂ 1.875＂ 1.375＂ 15/16UN 1.187＂ 2＂ 2.125＂ 1.375＂

Brand Name:Ruixin

Model Number:1.5inch-4inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool 3.5 inch I.Introduction Heavy casting and fishing tool is a casting and fishing tool used to catch tools or instruments with external necks (such as balance rods, plugs, throttles, etc.). It can be jolted upward. II.Common specifications and technical parameters Specifications Actual outside diameter Salvage diameter connection...

Brand Name:Ruixin

Model Number:2.875inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I. Overview: This special salvage tool is a special tool for salvaging plungers. II. Second, the technical parameters: Specification: 2-7/8inch Fishing neck: 1.375inch Connecting thread: 15/16-10UN Fishing diameter: 1.375inch III. Working principle: This tool...

Brand Name:RuiXin

Model Number:BZ7.6-76-Y

Place of Origin:China BaoJi

...Tool Catcher 70Mpa 10K H2S Wireline Pressure Control Equipment Overview The hydraulic tool catcher is composed of a body, a mandrel, a fish claw, a lower joint, a nonnut, a guard plate, a piston, a spring, etc., a seal and a rubber part. The lower end lower joint is connected to the wellhead joint. The upper end is nonexistent and can be connected...

Brand Name:RuiXin

Model Number:8-1/4-4ACME.0 Type

Place of Origin:China BaoJi

Wireline Slickline Pressure Test Plug And Test Cap And Lifting Cap Control Equipment Introduction The internal and external pressure test plug is a kind of auxiliary tool that uses thread and sealing surface to connect and seal the tools and equipment that need to be tested for pressure, and to test the tools for pressure.The BOP holder is the base for a ground-mounted BOP. It can be installed in any position and is connected...

Brand Name:RuiXin

Model Number:BZ7.6-70-Y

Place of Origin:BaoJi ,China

... lower connector, the union nut, the protective plate, the piston, the spring, the sealing parts, and the rubber parts. The lower connector at the bottom is connected to the wellhead connector. The upper end is a union fitting that can be connected to the

Brand Name:BOYU

Model Number:TYJKG-30

Place of Origin:China

...Stringing Tools Climbing Grapplers For Safety Tool Grapplers Model Specification Pole type Rated load(kg) Pole diameter(mm) Length(m) JKG-30 300 Variable diameter cement pole steel pole 150 Φ190-300 8-10 JKG-35 350 150 Φ250-350 10-12 JKG-40 400 150 Φ300-400 12-15 JKM-30 300 Variable...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch,3inch,4inch

Place of Origin:China Baoji

... the claw, and which is divided into three types: RB, RS and RJ. II. General Technical Parameters Size Actual OD Fishing neck Connection Grasping diameter Grasping distance PN. RB RS RJ 1.5＂ 1.43＂ 1.187＂ 15/16-10UN 1.187＂ 1.265＂

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I.Overview The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch，4inch 5inch 6inch 7inch

Place of Origin:China Baoji

...Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear joint), it can be converted to be an upward shear and releasing tool...

Brand Name:Ruixin

Model Number:1.25inch - 4inch

Place of Origin:China Baoji

...release the claw, and which is divided into three types: SB, SM and SS. II. General Technical Parameters: Size Fishing neck Connection PN 1.25＂ 1＂ 5/8-11UN W**-0*.0*.0* 1.188＂ 1.187＂ 15/16-10UN W**-0*.0*.0* 1.5＂ 1.187＂ 15/16-10UN W**-0*.0*.0

Brand Name:Ruixin

Model Number:2.5inch-4inch

Place of Origin:China Baoji

... (such as balance bar, plug, choke, etc.). It can be shaken up. II.Technical Specifications Actual outer Diameter Fishing Neck Connecting Thread Diameter 1.25＂ 1.68＂ 1.187＂ 15/16UN 1＂ 1.5＂ 1.875＂ 1.375＂ 15/16UN 1.187＂ 2＂ 2.125＂ 1.375＂