vulcan type 24 mechanical seal

Brand Name:YUE MI

Model Number:EMU-35/50/75

Place of Origin:Guangzhou, China

...seals. Newer pumps have a slightly modified seal installed, which is directly replaced by the Vulcan Type EMU. Please check the outer dimensions of the seat housing for correct identification, utilising the table below, D3 dimension. Type 1640 is available as complete mechanical seal...

Brand Name:JR

Model Number:950

Place of Origin:MADE IN CHINA

... Ring (Alumina 99%/Alumina 99.5%/SiC/SSiC/TC) Rotary Ring (Carbon/SiC/SSiC/TC) Secondary Seal (NBR/EPDM/FKM) Spring and Punched Parts (SS304/SS316) Performance Capabilities: Operational conditions: Materials temperature -50℃to +200℃

Brand Name:JR

Model Number:P011

Place of Origin:MADE IN CHINA

...: 20 m/s Axial movement: ± 0.5 mm Materials: Rotary Face: Carbon/SIC/TC Stat Ring: SIC/TC Seat Type: Standard AS-S16 Performance Capabilities Temperature -20℃ to 200℃, dependent on the elastomer Pressure Up to 21 bar Speed Up to 23 m/s

Brand Name:JR

Model Number:1577

Place of Origin:MADE IN CHINA

Mechanical Seals With Wave Spring Repalce Replace Vulcan 1577 To Suit A.B.S. Pumps Operational Conditions: for submersible pumps of AFP, PX, AF, VUP, PIRANHA models. for drainage pumps ABS IP 900. Temperature: -20ºC to +180ºC Pressure: ≤2.5MPa Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal...

Brand Name:JR

Model Number:1577

Place of Origin:MADE IN CHINA

... Speed: ≤15m/s Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel Performance Capabilities Temperature -30℃

Brand Name:JR

Model Number:1527

Place of Origin:MADE IN CHINA

Mechanical Gear Seal Mechanical Seal 1527 John Crane Seal Single Spring Mechanical Seal O-Ring Pump Seal Operations Conditions: Single Spring Mechanical Seal Perfect replacement of Eagle 1527, component mechanical seals Mechanical seal 1527 Analog to: Burgmann, AESSEAL, Anga, Vulcan 192, John Crane, Roten seal...

Brand Name:JR

Model Number:Vulcan 1632

Place of Origin:MADE IN CHINA

... Speed:≤15m/s​ 2. Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM, PTFE Spring and Metal Parts: Steel 3.

Brand Name:YUE MI

Model Number:M07

Place of Origin:Guangzhou, China

...Mechanical Seals TB IN-01 Equal to AES-M07 For Sanitary Pumps and Macerators. Both Single and Double Seals suit INOXPA PROLAC and SLR Pumps Muti-spring design shaft 0.625 ,1.00 and 1.50''Inoxpa Prolac S series mechanical seal replace Roplan R52 seal Roten S seal AES M07 Vulcan 50 seal Mechanical Seals 7K Equal to AES-W011 For Sanitary Pumps and Macerators. Both Single and Double Seals...

Brand Name:JR

Model Number:1694

Place of Origin:MADE IN CHINA

...: 20 m/s Axial movement: ± 0.5 mm Materials: Rotary Face: Carbon/SIC/TC Stat Ring: SIC/TC Seat Type: Standard AS-S16 Performance Capabilities Temperature -20℃ to 200℃, dependent on the elastomer Pressure Up to 21 bar Speed Up to

Brand Name:YUE MI

Model Number:P07 Double Sea

Place of Origin:Guangzhou, China

...: General Speed Mechanical Seal Temperature: General Temperature Mechanical Seal Performance: Wear Standard: Enterprise Standard Suit for ALF LAVL Series PumpsI replace: AES-P07 Pressure: 1.2 MPa or less ...

Brand Name:JR

Model Number:1527

Place of Origin:MADE IN CHINA

... to: Burgmann, AESSEAL, Anga, Vulcan 192, John Crane, Roten seal Mediums: Water, oil, acid,alkali, etc. Temperature: -20°C~180°C Pressure: ≤1.0MPa Speed: ≤ 10 m/Sec​ Materials: Stationary ...

Brand Name:JR

Model Number:17D

Place of Origin:MADE IN CHINA

Mechanical Seal 17D Single Spring Component Seal Single Spring Bellow Seal Single-Spring Seal 17D Mechanical Seal Roten Uniten 5 Seal For Oil Pump Operational Conditions: VULCAN TYPE7D SEALS, UNITEN 5 SEALS They are interchangeable with AES seals and each pump uses two seals: upper seal and lower seal...

Brand Name:JR

Model Number:68

Place of Origin:MADE IN CHINA

Mechanical Seal Wave Spring Seal 68 Industrial Shaft Seals For John Crane 80 Flowserve 168 Seal Latty T510 Operational Conditions: Wave sprung grub screwed 'Thin Cross Section' short working length mechanical seal. Available in Food Grade materials as ...

Brand Name:JR

Model Number:24

Place of Origin:Made In China

...:-30ºC to +200ºC Pressure:≤1.5bar Speed:≤15m/s Materials: 1. Sealing face: Graphite, Silicon carbide, 2. Secondary sealing: FKM ,Nbr ,Epdm 3. Metal component: Stainless steel Performance Capabilities: Temperature -30℃ to 200℃, dependent on the

Brand Name:KALU

Model Number:KL-E502

Place of Origin:China

...: Car, Sic, Ssic, Ceramic, TC Secondary seal: NBR, EPDM, etc. Spring and metal parts: 304, 316, HAST.C Size/Metric D3 D6 D7 L3 L4 L8 14 24.0 21.0 25.0 23.0 12.0 12.8 16 26.0 23.0 27.0

Brand Name:JR

Model Number:970 （Vulcan97, Billi BB27）

Place of Origin:MADE IN CHINA

Wave Spring Mechanical Seals Vulcan 1680 Suit Lkpl Nmog And Sru Lobe Pumps Operations Conditions: Temperature: -30°C to +140°C Pressure: Up to 10 bar (...

Brand Name:Bogeman

Model Number:166T

Place of Origin:Guangzhou, China

... Balanced Function for Pump, Compressor Certificate ISO9001 Replacement to Burgmann M37/M37g Seal Trademark Bergman Transport Package Carton Specification as requirement Origin China HS Code 84842000 centrifugal pump mechanical seal type 166T-5/8 3/4

Brand Name:JR

Model Number:24

Place of Origin:Made In China

...:-30ºC to +200ºC Pressure:≤1.5bar Speed:≤15m/s Materials: 1. Sealing face: Graphite, Silicon carbide, 2. Secondary sealing: FKM ,Nbr ,Epdm 3. Metal component: Stainless steel Performance Capabilities: Temperature -30℃ to 200℃, dependent on the

Brand Name:KALU

Model Number:KL-CS

Place of Origin:China

...: -20℃-200℃ Speed: ≤10m/s Pressure: ≤0.8Mpa Standard Size: 24-100mm Material: Rotary face: Carbon/Stainless steel Static Oring:,EPDM,NBR,AFLAS,KALREZ Features: a.External seal with hydraulically balanced seal face b.Non-metallic wetted parts

Brand Name:JR

Model Number:Hilge Pumps Seal

Place of Origin:MADE IN CHINA

...,28MM,38MM Materials: Stationary Ring: Ceramic, Silicon Carbide, TC Rotary Ring: Carbon, Silicon Carbide Secondary Seal: NBR, EPDM, FKM,