website load testing tools

Brand Name:HICORPWELL

Model Number:Fiber Optical Cleaver

Place of Origin:China

Optical Fiber Cleaver Fiber Testing Tools For 250 To 900 Micron In Black Features: • Model No: DC 09 • Applications: Single fibers: 250um to 900um coating, 125um ...

Brand Name:HICORPWELL

Model Number:40MW Fiber Optic Visual Fault Detector

Place of Origin:China

Pentype VFL Optical Fiber Visual Fault locator 40MW For End-to-End Visual Fiber Identification Fiber Testing Tools Method of use 1. Screw the end cap from the pen, the battery will be prepared into the pen, battery cathode to the end cap, the positive on ...

Brand Name:HICORPWELL

Model Number:Fiber Optic Visual Fault Detector

Place of Origin:China

Fiber Testing Tools Visual Fault Detector 10MW 20MW 30MW Black Leather Sheath Method of Using : 1. Screw the end cap from the pen, the ...

Brand Name:HICORPWELL

Model Number:HCW-325 Fiber Optic Visual Fault Detector

Place of Origin:China

HCW-325 Fiber Testing Tools Visual Fault Detector 10MW 20MW 30MW Black Leather Sheath Method of Using : 1. Screw the end cap from the pen, the ...

Brand Name:Techcore

Model Number:DST 10000-15000

Place of Origin:CHINA

...Testing Tools APR Tools Slim Hole DST Tools Introudction of APR DST Tools The APR DST Tools is a sort of well testing downhole tools which is operated by the annulus pressure. Drill stem Testing Tools are applied for oil and gas well testing formations after casing has been set in a well. Drill Stem Tests in holes combined with measurement of the production rate,pressure and temperature. The drill stem testing

Brand Name:KingPo

Model Number:CMT-2010HAZQ

Place of Origin:China

...Testing System , DC Motor Loading Test System Name: Balance car DC motor loading test system Model: CMT-2010HAZQ Product introduction: CMT-2010 HAZQ is a set of conditions for testing the motor of the analog balance car under different load conditions. The test system allows the engineer to set different loading scenarios in the test software, such as user weight, uphill, downhill, etc. The system can be loaded

Place of Origin:China

Brand Name:HYUNDAI

HYUNDAI Elevator test tool HHT-2000 for passenger lift/Elevator service tool

Brand Name:Techcore

Model Number:HPHT Drill Stem Testing

Place of Origin:China

.... The drill stem testing tools are applicable for 4 1/2” to 20” casing, the tools OD is 3 7/8” and 5”, Working pressure upto 105Mpa, working temperature upto 425F, the DST tools is designed and manufactured according to NACE MR0175 standard,

Brand Name:Ruixin

Model Number:1.875inch-2.81inch

Place of Origin:China Baoji

... XA/XO sliding door. The X selective Test tool operates with a ‘J’ slot mechaism that allows the tool to actuate and locate corresponding shifting profile selectively. Ⅱ. General Technical Parameters Size Fishing neck(OD) OD Key ...

Brand Name:kingpo

Model Number:KP-62552

Place of Origin:china

...test freezing load test package M test package Product Description IEC62552 ISO15502 test freezing load test package M test package Introduction: The freezing load test package is made according to GB/T8059.2 GB/T8059.4 IEC62552 EN15502 ISO15502, and we can also make the package in different standard according to your different requirement. Test...

Brand Name:AI

Model Number:KFZ

Place of Origin:China

...Load and No-load Test Instrument I. Introduction: KFZ Load and No-load Test Instrument is used to measure the transformer load current, load loss, short-circuit voltage, short circuit (load) losses. The machine is mainly used in the test bed with integrated for supporting the use of transformers to achieve high-precision testing of the no-load load characteristics of the transformer. II.Main Features 1.The transformer load and no load

Place of Origin:China

Brand Name:Haida

Model Number:HD-C03

...Test Instrument is widely used in knife or carving fork, Clamped at the handle and loaded at the dlade or prong tip , is raised until the load is just lifted.The angle of permanent deformation after release of the load is measured. Knife Cookware Testing Instrument , Tailor - Made Bending Stiffness Tester The Main Technical Parameter: Model: HD-C03 Bending Strength Test...

Brand Name:Ruixin

Model Number:1.875inch-2.75inch

Place of Origin:China Baoji

...Test tool SR Wireline And Slickline Tools X Selective Test tool SR Wireline and Wireline Running Tool I. Introduction X Selective Test Tools SR Wireline And Slickline Tools is udef to locate and either open or close a typical style XA/XO sliding door. The X selective shifting tool operates with a ‘J’ slot mechaism that allows the tool...

Brand Name:KingPo

Model Number:CMT-1030SM

Place of Origin:China

...loading test system Model Number: CMT-1030SM Product introduction: CMT-1030SM servo motor loading test system mainly uses hysteresis dynamometer to detect servo motor and stepper motor T-N curve and maximum stall point. The speed of the motor is controlled by the motor driver, and the locked-rotor torque is measured at different speeds of the motor through hysteresis dynamometer loading, and the PN curve is plotted. The load

Brand Name:kingpo

Model Number:IEC60601-2-52-Figure 201 .1 03 b

Place of Origin:china

... test tools | Cylinder tool Cylinder tool | IEC60601-2-52-Figure 201 .103 b Cylinder tool Key 1 Total weight 3,34 kg ±0,05 kg 2 Marked centre line 3 Surface roughness 1 ,6 4 Drilling hole for weight adjustment Figure 201 .1 03 b) – Cylinder tool ...

Brand Name:Konnwei

Model Number:KW600

Place of Origin:China

... Battery Load Tester Monitor Digital Analyzer Battery Test Tool Konnwei KW600 Cars Battery Diagnosis parameters: Item type Battery Tester 12V Support system XP WIN7 WIN8 WIN10 Screen Size 2.4 inch Functions Battery test, cranking test, charging test Power...

Brand Name:Sinuo

Model Number:SN2601

Place of Origin:China

...Load Test Bench Complied Standards & Clauses for Electric Vehicle Conductive Charging Pile Static Load Test Bench This Electric Vehicle Conductive Charging Pile Static Load Test Bench complied to EN IEC 61851-1-2019, IEC 61851-1-2017 and etc. Technical Parameters for Electric Vehicle Conductive Charging Pile Static Load Test...

Brand Name:Haida

Model Number:HD-F778

Place of Origin:Guangdong, China (Mainland)

...Load Test Furniture Test PRODUCTS DESCRIPTION The Chair Stability Tester is used to perform the forwards overbalancing test. DESIGN STANDARD: BIFMA 5.1 STANDARD FEATURES: Test Platform: 1800x1000mm The Max. Load force : 150KG The stroke for loading weight: 350mm Compress air : 6kg/cm2 TEST PROCEDURES: a) Apply a vertical load of 61 kg (135 lb.), through the front-stability loading...

Brand Name:KingPo

Model Number:CMT-1010CS

Place of Origin:China

... test bench is a test system for testing the performance of automotive door lock motor production lines. A test system connects two dynamometers, the dynamometer works in turn, the test motor is under a certain torque point, and it is judged whether the

Brand Name:SAMYON

Model Number:SLPT

Place of Origin:CN

... testing will take longer time with different loading grade. So it can check the displacement under the different loading force through the high precision displacement gauge. The systemcan be used for the Static Axial Compressive Load testing, and also can