winter base layer

Brand Name:Boyne

Model Number:BY-GFH

Place of Origin:China

.... 2. 4 sides clear glass door together with LED light perfectly shows the cakes 3. Display compartment is constructed with double layer hardened glass 4. Environmentally friendly refrigerant R134a and famous brand compressor are used to ensure the

Brand Name:Boyne

Model Number:BY-DHA

Place of Origin:China

Cake Display Showcase Three Layer Fan Cooling Refrigerated Pastry Display Case 1. Curve lines matches the stablesness of marble base,constructing a deluxe abd beautiful appearance. 2. Marble base and decorative lines of different colors are available for ...

Brand Name:Bicheng

Model Number:BIC-302.V1.0

Place of Origin:CHINA

...Layer Flexible Printed Circuit (FPC) Built on Polyimide With Immersion Gold and Stiffener for Sports Insole (Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of sports insole. Basic specifications Base material: Polyimide 25μm + 0.3mm FR4 stiffener. Layer count: 2 layers

Brand Name:Bicheng

Model Number:BIC-303.V1.0

Place of Origin:CHINA

...Layer Flexible Printed Circuit (FPC) Built on Polyimide for Modem Wireless (Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Modem Wireless. Basic specifications Base material: Polyimide 12.5μm + 0.2mm polyimide stiffener. Layer count: 2 layers...

Brand Name:Bicheng

Model Number:BIC-304.V1.0

Place of Origin:CHINA

...General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Microstrip Antenna. Basic specifications Base material: Polyimide 25μm + 0.3mm stiffener of stainless steel Layer count: 2 layers Type:

Brand Name:Bicheng

Model Number:BIC-305.V1.0

Place of Origin:CHINA

...Layer Flexible Printed Circuit Board (FPC) Built on Polyimide for Embedded Operating System (Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Embedded Operating System. Basic specifications Base material: Polyimide 25μm + 0.3mm stiffener of FR-4 Layer count: 2 layers

Brand Name:Bicheng

Model Number:BIC-308.V1.0

Place of Origin:CHINA

...reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of PLC Control. Basic specifications Base material: Polyimide 25μm Layer count: 2 layers Type: Individual FPC Format: 73mm x

Brand Name:Bicheng

Model Number:BIC-311.V1.0

Place of Origin:CHINA

...Layer Flexible Printed Circuit (FPC) Built on Polyimide With Stiffener for Door Access System (Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Door Access System. Basic specifications Base material: Polyimide 12.5μm + 0.2mm polyimide stiffener Layer count: 2 layers

Brand Name:Bicheng

Model Number:BIC-312.V1.0

Place of Origin:CHINA

... for reference) General description This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Multicoupler. Basic specifications Base material: Polyimide 25μm + 0.2mm polyimide stiffener Layer count: 2 layers Type:

Brand Name:Bicheng

Model Number:BIC-319.V1.0

Place of Origin:CHINA

...Layer Flex PCB Built on 1oz polyimide with polyimide stiffener for LCD Connector (Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference) General description This is a type of Single Layer flexible printed circuit (FPC) built on 1oz polyimide for the application of LCD connector. Basic specifications Base material: Polyimide 12.5μm + 0.2mm stiffener of polyimide Layer count: 1 layer

Brand Name:Bicheng

Model Number:BIC-466.V1.0

Place of Origin:CHINA

...layer Thin PCB 0.5mm 4-Layer Thin PCB Board With Immersion Gold (Printed circuits boards are custom-made products, the picture and parameters shown are just for reference) 1.1 General description This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base...

Brand Name:Bicheng

Model Number:BIC-481.V1.0

Place of Origin:CHINA

...layer Printed Circuit Board 8 Layer PCB Board Built on Tg170 FR-4 With Immersion Gold for Wireless Communication. 1.1 General description This is a type of 8 layer printed circuit board built on FR-4 Tg170 substrate for the application of Wireless Communication. It's 1.6 mm thick with white silkscreen on green solder mask and immersion gold on pads. The base...

Brand Name:Bicheng

Place of Origin:CHINA

... Details Our 2-layer PCB is meticulously crafted with the following specifications: - Base Material: TMM4, a ceramic hydrocarbon thermoset polymer composite, known for its superior reliability and performance. - Layer Count: 2 layers, allowing for

Brand Name:Bicheng

Model Number:BIC-052.V1.0

Place of Origin:CHINA

...layers RT duroid 6002 PCB Rogers 10mil Laminate This 2-layer rigid PCB serves high-frequency microwave applications, utilizing Rogers RT/duroid 6002—a premium ceramic-filled PTFE material—to achieve outstanding signal integrity and environmental resilience.Key construction specifications are as follows: 1. PCB Specifications Parameter Details Base Material Rogers RT/duroid 6002 (ceramic-filled PTFE microwave laminate) Layer Count 2 layers...

Brand Name:Bicheng

Model Number:BIC-052.V1.0

Place of Origin:CHINA

...layer PCB on RF-10 Substrate 20mil Immersion Silver Finish This 2-layer high-performance PCB is engineered for RF (Radio Frequency) applications, utilizing the advanced properties of RF-10 copper clad laminates to achieve exceptional electrical, thermal, and mechanical performance. 1. PCB Specifications Parameter Specification Base Material RF-10 copper clad laminate (ceramic-filled PTFE with woven fiberglass reinforcement) Layer Count 2 layers

Brand Name:XCE

Model Number:XCED

Place of Origin:China

...Layers: 2L Board thickness: 1.6mm Minimum line width/spacing: 0.3mm Minimum hole diameter: 0.2mm Finishing copper thickness: 1oz Surface finishing: ENIG Solder mask: Grey Silkscreen: White Base material: Rogers Parameter: Layer No. 1-26 Min board thickness 2 layer 0.2mm 4 layer 0.4mm 6 layer 0.6mm 8 layer 0.8mm 10 layer...

Brand Name:XCE

Model Number:XCEC

Place of Origin:China

...Base material: Taconic Board thickness: 0.6mm Customized: YES Copper thickness: 70UM Min line space and width: 0.2MM Technology: our products have passed UL, ISO9001 and IS014001 certifications. NO ITEM Technical capabilities 1 Layers 1-30 layers 2 Max. Board size 2000×610mm 3 Min. board Thickness 2-layer 0.15mm 4-layer 0.38mm 6-layer 0.55mm 8-layer 0.80mm 10-layer...

Brand Name:XCE

Model Number:XCER

Place of Origin:China

...material: rogers Our pruducts: our products have passed UL, ISO9001 and IS014001 certifications. NO ITEM Technical capabilities 1 Layers 1-30 layers 2 Max. Board size 2000×610mm 3 Min. board Thickness 2-layer 0.15mm 4-layer 0.38mm 6-layer 0.55mm 8-layer 0

Brand Name:Wenyi Electronics

Model Number:GPI-FC-006

Place of Origin:Made in China

...layers Two Sides ESD Shield Layer PET Flex Circuit Cable Item Decription: Customized 14 Pin Connector Three layers Two Sides ESD Shield Layer PET Flex Circuit Cable Base : 0.125mm PET (polyester) ESD layer: electromagnetic shielding Circuit Print Paste: Silver Insulate: Green Oil Print Layer: multi-layer...

Brand Name:Bicheng Enterprise

Model Number:BIC-259-V2.59

Place of Origin:China

...-layer structure: the flexible circuit of this structure is the simplest structure of the flexible PCB. Usually the base material (dielectric substrates) + transparent rubber(adhesive) + copper foil is a set of purchased raw materials(semi-manufactures)