wireline tool string centralizer

Brand Name:ZZ Top

Model Number:WL1.75

Place of Origin:CHINA

...run, manipulated and retrieved by the upward or downward movement of the wire which is itself raised and lowered by a winch at the surface. The tool string is make up of a number of basic components with various other service tools attached according to

Brand Name:Techcore

Model Number:Pear Drop Rope Socket

Place of Origin:CHINA

... the wireline by the pear-shaped wedge. The pear drop rope socket consists of a body with an external fishing neck, sleeve and a brass wedge. It is a female thread on the bottom to connect the tool string. The tapered fishing neck on the top is used to

Brand Name:ZZ TOP OIL TOOLS

Model Number:Swivel Joint

Place of Origin:China

...Wireline Tool String 1.25" - 2.5"​ The Swivel Joint is the knuckle joint, as the part of wireline tool string, the swivel joint is used to minimize the line twist when running in and and pulling out of the well. It is usually located below rope socket and the bearings permits rotational movement when maintaining longitudinal rigidity in the tool string...

Brand Name:Ruixin

Model Number:1.25inch~6inch

Place of Origin:China Baoji

Tubing swage Wireline Tool String I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General ...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 1.875inch 2inch 2.25inch,2.5inch.3inch,4inch,5inch,6inch

Place of Origin:China Baoji

Tubing End Locator Wireline Tool String Ⅰ.Introduction A tubing end locator is a tool used for accurate measurement of the depth of tubing just as the name implies, which is located at the end of tubing to measure the depth of tubing correctly. Ⅱ.General ...

Brand Name:Ruixin

Model Number:1.25inch~6inch

Place of Origin:China Baoji

2.5 inch Tubing swage Wireline Tool String I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General ...

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

3 inch Tubing swage Wireline Tool String I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General ...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 1.875inch 2inch 2.25inch,2.5inch.3inch,4inch,5inch,6inch

Place of Origin:China Baoji

2.125 inch Tubing End Locator Wireline Tool String Ⅰ.Introduction The tubing end locator, as the name suggests, is a tool used to accurately measure the depth of tubing. This type of locator is positioned at the end of the tubing so that the depth of the ...

Brand Name:pear drop rope socket

Model Number:2inch

Place of Origin:China Baoji

...Wireline Tool String is a versatile product from a variety of manufacturers and countries of origin. It is designed to help customers complete their operations with maximum efficiency and safety. Available in a range of lengths, this product can be connected to other tools...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Rope Socket

Place of Origin:China

...tool string. Available in various sizes, the rope socket consists of a body, spring, disc and spring support. The body of Disc & Spring type ...

Brand Name:Ruixin

Model Number:1.5inch 1.75inch,1.875inch 2inch 2.5inch3.0inch,3.5inch,4.0inch,4.5inch.

Place of Origin:China Baoji

Sand Pump Bailer Wireline Tool String I. Introduction: A double male adapter sub an extension bailer tube are available as optional extras in the event of large volume bailing ...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.25inch 2.5inch

Place of Origin:China Baoji

Alloy Steel Wireline Tool String Slip Rope Socket QLS I. Overview: Slip Rope Socket plays the role of connecting cable and downhole instrument, and its upper load-bearing part, lower part is lead part, and the top has fishing neck. II.the common ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hydraulic Jar

Place of Origin:China

Slick Line Tools Hydraulic Jar For Wireline Tool String 1.5" - 2.5" The Hydraulic Jar is a wireline service tool designed for dependable upward jarring during wireline operations. When a strain is taken on the wireline the top sub and mandrel are pulled ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Rope Socket

Place of Origin:China

Slip Type Rope Socket Alloy Steel For Wireline Tool String 1.25" - 2.5" Slip type Rope socket is a kind of rope socket applied for wireline tool string. The slip type rope socket is designed for use with small braided lines up to 7/32” diameter. Slip type ...

Brand Name:Techcore

Model Number:Quick Joint

Place of Origin:CHINA

... versus sucker rod type threaded connections when supplied integral to tooling components. The quick joint / quick connect is used to minimize the line twist when running in and pulling out of the well. It is usually located below rope socket and the

Brand Name:ZZ TOP OIL TOOLS

Model Number:Standard Stem

Place of Origin:China

Stem Weight Bar / Standard Stem For Wireline Tool String 1.5" - 2.5" The wireline stem or weight bars, sometime referred to as Sinker Bars, are designed to serve two purpose. Firstly the standard stem is the weight required to overcome forces ...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.5inch

Place of Origin:China Baoji

... centralizer can overcome friction which can be caused by the tool string scraping against the tubing wall. Ⅱ. General Technical Parameters Size O.D. of roller Fishing neck Connection PN. 1.5＂ 1.75＂ 1.375＂ 15/...

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.75inch 1.875inch 2inch 2.5inch

Place of Origin:China Baoji

... string accessory, used to provide flexibility within the wireline tool string. It is recommended to place a knuckle joint immediately below the rope socket when the rope socket does not offer rotation within the wireline .The PCE Wireline Knuckle Joint is

Brand Name:Ruixin

Model Number:1.5inch 1.75inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...Wireline Heavy Duty Knuckle Joint Slickline Tool String Wireline Heavy Duty Knuckle Joint Wireline Tool String Ⅰ.Introduction A wireline heavy duty knuckle joint is a tool string accessory, used to provide flexibility within the wireline tool string. It is recommended to place a knuckle joint immediately below the rope socket when the rope socket does not offer rotation within the wireline...

Brand Name:Ruixin

Model Number:1.5inch 1.75inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...string accessory, used to provide flexibility within the wireline tool string. It is recommended to place a knuckle joint immediately below the rope socket when the rope socket does not offer rotation within the wireline . II. General technical parameters: