load test plug socket tester

Brand Name:SHC

Model Number:SC-CEI 23-50

Place of Origin:China

...sockets conform to CEI 23-50 standards. And the mainly application industries are electronics, electrical appliances, plugs and sockets and other similar areas. 2. Features: Gauge dimensions, tolerances, material, hardness, surface roughness conform to the

Brand Name:SHC

Model Number:SC-CEI 23-50

Place of Origin:China

...sockets conform to CEI 23-50 standards. And the mainly application industries are electronics, electrical appliances, plugs and sockets and other similar areas. 2. Features: Gauge dimensions, tolerances, material, hardness, surface roughness conform to the

Place of Origin:China

Brand Name:HongCe

Model Number:SOB-1

... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

... Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to pull the plug out of the socket and the single pole pin pulled out from the socket ...

Place of Origin:China

Brand Name:KeRang

...Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug or portable socket...

Brand Name:kingpo

Model Number:KP-CG95

Place of Origin:china

IEC 62196 Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is ...

Place of Origin:China

Brand Name:HongCe

Model Number:MF-1

... and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling the single plug pin from the plug bush is in the range of the standard required. The clamping system is easy to operate. The top

Place of Origin:Guangdong, China

Brand Name:HABOTEST

Model Number:HT107E, HT107E

...Socket Voltage Tester standard LED wall plug with RCD and Ground wire Live Neutral line LCD d Lead Time : Quantity(Pieces) 1 - 40 41 - 1000 >1000 Est. Time(days) 3 25 To be negotiated Specification Function HT107B HT107D HT107E Voltage range AC 48~250V RCD test >30mA Voltage measurement (48V~250V/45~65Hz) √ √ √ LCD display √ √ √ Backlight √ √ √ Socket...

Brand Name:HongCe

Place of Origin:China

... NO. Gauge name 1 AS/NZS3112 figure 3.1 Gauge for depth of no-contact test 2 AS/NZS3112 figure 3.6 Device for checking the resistance to lateral strain (Three-pin gauge) 3 AS/NZS3112 figure 3.7 Device for checking the resistance to lateral ...

Brand Name:SHC

Model Number:SC-EN75

Place of Origin:China

...Plug And Socket EU Standard Specification: EN50075 Figure Name Figure 1 Gauge for pin diameter Figure 2 Gauge for interchangeability Figure 3 Standard test finger Figure 4 Gauge for checking impossibility of single-pole insertion of plugs into socket-outlets Figure 5 Apparatus for testing cord retention to the accessory Figure 6 Apparatus for flexing test Figure 7 Arrangement for compression test...

Brand Name:SHC

Model Number:SC-EN75

Place of Origin:China

...Plug And Socket EU Standard Specification: EN50075 Figure Name Figure 1 Gauge for pin diameter Figure 2 Gauge for interchangeability Figure 3 Standard test finger Figure 4 Gauge for checking impossibility of single-pole insertion of plugs into socket-outlets Figure 5 Apparatus for testing cord retention to the accessory Figure 6 Apparatus for flexing test Figure 7 Arrangement for compression test...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:kingpo

Place of Origin:china

...plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug with earthing contact insertion flanking force 1 DIN-VDE0620-1-Lehre5 To test...

Brand Name:HongCe

Model Number:HC9902

Place of Origin:China

IEC60884 Clause 10.1 300N Plug Compression Mechanical Strength Test Equipment Product information: The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2)...

Brand Name:KingPo

Place of Origin:China

...Plug Socket Tester For Dimensional Measurement VDE 0620 Germany Plug Socket Tester For Dimensional Measurement And Verification Of Plug Socket Of Household Appliance Product information: These measuring gauges confirm to the standard of VDE0620, which are used for the dimensional measurement and verification of the plug socket...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

Figure 2.8 Application Of Force For Pin Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus...

Brand Name:PEGO Group

Model Number:PG-NSP

Place of Origin:China

...mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by ...

Brand Name:HongCe

Model Number:HO6508

Place of Origin:China

Performance Tester For Proximity Switches With Integrally Connected Cables Pull Force 160N Torque Test 0.1Nm (360°) Product Introduction The performance tester for proximity switches with integrally connected cables is special designed and manufactured as ...

Place of Origin:China

Brand Name:HongCe

Model Number:IN-1

Insulation Sleeves of Plug Pins Abrasion Test Apparatus Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the ...