load test plug socket tester

Place of Origin:China

Brand Name:HongCe

Model Number:PH-2

Pendulum Impact Test Apparatus For Energy Impact Test Product details: This testing device conforms to IEC62262. It is used for the mechanical strength test of the sheet metal like the substation ark and the metalloid electric energy metering cubicle. The ...

Brand Name:HongCe

Place of Origin:China

... C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs, the gauge in figure 2 is used to check the impossibility of plugging one terminal into outlets. Model specification and technical parameters: Picture view:

Brand Name:HJ

Model Number:HC9916

Place of Origin:China

Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16. Application: This device is used for verify whether the maximum withdraw force and minimum withdraw force to pullout a plug or plug pin from socket...

Brand Name:HongCe

Model Number:CR-6

Place of Origin:China

Flexible Cable Cord Retention Force Test Apparatus IEC60884 Figure 20 , VDE0620 Product details: HongTong has customzied a 6 workstations flexible cable cord retention test apparatus, it well meets our customer's special testing requirements. The cord ...

Place of Origin:China

Brand Name:KeRang

...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The

Brand Name:PEGO

Model Number:PG-TIS166

Place of Origin:China

... and gauges in figure A.6 to A.7 are used to check pulling force, in case of socket-outlet the gauge in fig.8 to fig.10 are used additionally. 2. Specification No. Standard and figure number Description Quantity 1 TIS166-2549 ...

Place of Origin:China

Brand Name:HongCe

Model Number:LH-1

Climatic Chamber Environmental Test Chamber Product details: This chamber is in accordance with the IEC60884.1 standard which is used for the heat ageing test and electrical insulation test of the plasticity material (rubber, plastic). It is equipped wit...

Brand Name:HongCe

Model Number:HC9924

Place of Origin:China

IEC60884 Clause 24.4 Testing Device For Checking The Impact Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on Application: This device is use for checking the impact...

Place of Origin:China

Brand Name:HongCe

Model Number:FP-1

Apparatus To Verify The Fixation Of Pins In The Body Of The Plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. It is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate ...

Place of Origin:China

Brand Name:KeRang

Insulation Sleeves of Plug Pins Abrasion Test Apparatus IN-1 Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC884Figure28.It is used to test the abrasion resistance of the insulating bushing of ...

Place of Origin:Guangdong, China

Brand Name:Habotest

Model Number:HT106D

... >30mA >30mA Voltage Measurement (48v-250v/45-65Hz) Yes LCD Display Yes Backlight Yes Socket Connection Detection Correct connection Open ground Open neutral Open Live Live wire and ground wire reverse ...

Brand Name:SHC

Model Number:SC-BS-F32

Place of Origin:China

BS1363 Figure 32 Apparatus For Tests On Adaptor Pins Parameters: Standards BS1363 Figure 32 Function For Tests On Adaptor Pins Weight 1100N Material Stainless steel BS1363 List of references Figure1 test pin Figure 2a)-apparatus for mechanical strength ...

Brand Name:SHC

Model Number:SC-BS-F32

Place of Origin:China

BS1363 Figure 32 Apparatus For Tests On Adaptor Pins Parameters: Standards BS1363 Figure 32 Function For Tests On Adaptor Pins Weight 1100N Material Stainless steel BS1363 List of references Figure1 test pin Figure 2a)-apparatus for mechanical strength ...

Place of Origin:China

Brand Name:HongCe

Model Number:CR-1

IEC60884 Figure 20 Apparatus For Cord Retention Testing Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord ...

Brand Name:HongCe

Model Number:HC9931

Place of Origin:China

... and reverse taper gauge Standard: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 24.18, figure 35. Application: It is used to test the groove, hole and the reverse taper. It has become an ...

Place of Origin:China

Brand Name:KeRang

Test Apparatus for lateral stress LS-1 Product overview: The appliance conforms to the standard of IEC884 figure 13. It is suitable for checking socket of rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see...

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

IEC60884 Figure 28 Apparatus for abrasion test on insulating sleeves of plug pins Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC60884 Figure28. It is used to test the abrasion resistance of ...

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

IEC60884 Figure 28 Apparatus for abrasion test on insulating sleeves of plug pins Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC60884 Figure28. It is used to test the abrasion resistance of ...

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

IEC60884 Figure 28 Apparatus for abrasion test on insulating sleeves of plug pins Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC60884 Figure28. It is used to test the abrasion resistance of ...

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

IEC60884 Figure 28 Apparatus for abrasion test on insulating sleeves of plug pins Product details: The test apparatus is designed and manufactured according to the standard requirement of IEC60884 Figure28. It is used to test the abrasion resistance of ...