sterility test method

Brand Name:Btutest

Model Number:ZS-20H

Place of Origin:Made in China

... JC / T681 (2022 standard) and cement mortar strength test method (1S0 method) GB / t17671-2021. It is a cement mortar vibrating table. The product uses a color liquid screen to display the vibration times and ...

Brand Name:Btutest

Model Number:SBY-III

Place of Origin:Made in China

... samples in the static 20 ℃± 1 ℃ constant temperature water according to the national cement strength testing method ISO method. Several water tanks are added in the water tank to put the cement samples. It cools and heats the circulating water in

Brand Name:BOTO

Model Number:BT-DWC-60

Place of Origin:China

...Testing Low Temperature Cooling Chamber Product Description 1. Application The machine is designed according to Charpy notch Impact Test Method for Metal Material, and adopts compressor cooling technology. It utilizes the heat balance principle and cycle stirring method...

Brand Name:BOTO

Model Number:BT-DWC-60

Place of Origin:China

...Testing Low Temperature Cooling Chamber Product Description 1. Application The machine is designed according to Charpy notch Impact Test Method for Metal Material, and adopts compressor cooling technology. It utilizes the heat balance principle and cycle stirring method...

Brand Name:DAXIAN

Model Number:DX8342

Place of Origin:China

...Test Methods for Flammability of Building Materials’ GB/T10801.2-2002"Extruded Polystyrene foam for Heat insulation (XPS)" 适用范围:主要适用于在规定条件下判断建筑材料是否具有可燃性试验方法. Scope of application: It is mainly applicable to the test method...

Brand Name:DAXIAN

Model Number:DX8602

Place of Origin:China

... of Plastic Hot Air Furnace Method" and GB/T9343-2008 "Test Method for Combustion Performance of Plastics - Determination of Flash Ignition Temperature and Spontaneous Ignition Temperature", which fully conforms to GB4610-2008 and ...

Brand Name:DAXIAN

Model Number:DX8359A

Place of Origin:China

... of Thermal Insulation Materials" relevant standards Non-equivalent: ASTM C411-82 "Test Method for Hot Surface Performance of Highest Temperature Thermal Insulation Materials" ASTM C447-85 "Non-equivalence of ...

Brand Name:DAXIAN

Model Number:DX8362

Place of Origin:China

...tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states eventually use this, instead of the traditional regulatory methods...

Brand Name:Lonroy

Model Number:GA-8A

Place of Origin:China

... Introduction The GA-8A vibrating fineness tester is a new type of instrument which conforms to international fiber inspection standards. The vibration method for measuring fiber linear density is the chemical fiber linear density testing method of the

Brand Name:YUYANG

Model Number:YY144

Place of Origin:China

... and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or walls, provided that the materials or

Brand Name:Lonroy

Model Number:LR-A168

Place of Origin:China

...Testing ISO 13938 IWS TM 29 Pneumatic Fabric Burst Strength Tester EDANA 80 Textiles Bursting Performance Tester Compliant with standard GB/T 7742.2-2015 Textiles - Bursting performance of fabrics - Part 2: Determination of bursting strength and bursting expansion by air pressure method ISO 13938-2 - Test Methods for Bursting

Brand Name:YUYANG

Model Number:YY144

Place of Origin:China

...exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or walls, provided that the materials or the whole assembly, with its own

Brand Name:Advanced Instruments

Model Number:PMCC-A

Place of Origin:China

... Closed-Cup Flash Point Tester for Oil Testing is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup ...

Brand Name:Advanced Instruments

Model Number:AIC-260A

Place of Origin:China

...Testing Equipment is designed and manufactured according to the requirements specified in the People's Republic of China standard GB/T 260 "Determination of Water in Petroleum Products". It is applicable for determining the water content in petroleum products using the test method...

Brand Name:LONROY

Place of Origin:Guangdong, China

Model Number:PT-504A

...Testing Film T 10 sets of thermostatic tape retention tester/High temperature viscosity tester/Oven adhesion tester High temperature viscosity tester Product Description: It is designed and manufactured in accordance with GB 4851 (test method for the stickiness of pressure-sensitive adhesive tape) and the standard method...

Brand Name:CHENGFENG

Model Number:CF8425

Place of Origin:China

...methods, to determine their ability to withstand compression without yielding or loosening over time. It is applicable to non-rigid plastics and determines their ability to return to their original size over time after deformation. Compliant with standards It complies with the requirements of the test standard "ASTM D621 Test Method

Brand Name:Advanced Instruments

Model Number:AIC-52032

Place of Origin:China

... Carbon black content test device is designed and produced in line with GB/T2951.41—2008 test methods for insulating and sheathing materials of electric and optical cables--Part 41: Methods specific to polyethylene and polypropylene compounds...

Brand Name:Advanced Instruments

Model Number:AIC-2274

Place of Origin:China

General Introduction The Test Method of this Distillate Fuel Oxidation Stability Test Equipment is that a filtered quantity of the sample is placed into an oxidation tube, through which oxygen is passed at a rate of 50 mL/min. The sample is oxidized at a ...

Place of Origin:Guangdong, China

Brand Name:LONROY

...the production of aluminium - Baked anodes and sidewall blocks - Determination of reactivity to air - Part 1: Mass loss method, MOD 2. YS/T 63.11-2006; Test Methods for Carbon Materials Used in Aluminum—Part 11: Determination of Reactivity with Air by

Place of Origin:Guangdong, China

Brand Name:LONROY

...Test Compactor Product Overview The Vibratory Compaction Molding Machine is specialized equipment designed and manufactured to meet the technical requirements for specimen preparation—specifically using the vibration method for semi-rigid base course materials—as outlined in the Test Methods...