wireline tool string calibration tool

Brand Name:ZZ Top

Model Number:1.5" Wireline Swivel Joint

Place of Origin:CHINA

...Wireline Tool String Swivel Joint 1.5" Slick Line Tools The Swivel Joint is the component of wireline tool string, which is designed to assist in the changing of components in the wireline tool string. The swivel design allows the operator to change out long sections without having to physically rotate them. The wireline swivel joint is installed directly below the rope socket to provide rotation of the tool string...

Brand Name:TECHCORE

Model Number:Wireline Knuckle Joint

Place of Origin:China

... are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string this situation can be avoided. Knuckle Joints are run immediately below Mechanical Jar.

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.5inch

Place of Origin:China Baoji

... centralizer can overcome friction which can be caused by the tool string scraping against the tubing wall. Ⅱ. General Technical Parameters Size O.D. of roller Fishing neck Connection PN. 1.5＂ 1.75＂ 1.375＂ 15/...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

... up and down. The effect of jarring depends to a large extent on the weight of the jar upper link and the jar stroke, as well as tubing size and verticality, tool size and depth, fluid density and viscosity, well pressure, and wire size. Has a positive or

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

1.875 inch Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated well bores. The rollers on the stem run along the underside wall of the tubing. The use of rollers...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Wireline tools

Place of Origin:China

...Wireline Tool String 1.25" - 2.5" For Wireline Service The Wireline Tool String is the name give to any assembly of wireline equipment run in the well to perform some type of operation. In wireline job, the wireline string is run, manipulated andretrieved by the upward or downwardmovement of the wire which is itself raised and lowered by a winch at the surface. The wireline tool string...

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

1.25 Inch Wireline Multi-Roller Knuckle Joint Wireline Tool String Ⅰ. Introduction The Roller Knuckle Joint is a wire tool attachment, which is used to provide a bending to the tool string. Because the increase of the bending rod and the vibrator cannot ...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...Wireline Tools And Equipment Wireline Roller Ball Sub Wireline Tool String I. Overview A wireline roller ball sub is utilized when running in heavily deviated wells, especially if there are dog legs within the completion string. The roller ball overcomes friction which can be caused by the tool string...

Brand Name:Ruixin

Model Number:1.5inch ,1.75inch，1.875inch，2.5inch.

Place of Origin:China Baoji

...Wireline And Slickline Tool String QLS Quick Joint Wireline Tool String I.Introduction QLS Quick Joint is used to minimize the line twist when running in and pulling out of the well. It is usually located below rope socket and the bearings permits rotational movement when maintaining longitudinal rigidity in the tool string...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

90 Degree Rotate Breech Lock Quick Joint Wireline Tool Connections Breech Lock Quick Joint Wireline Tool String I.Introduction A breech lock quick joint is wireline tool string connector used instead of the traditional screwed connection.Its structure ...

Brand Name:Ruixin

Model Number:1.25inch-2.5inch

Place of Origin:China Baoji

1.5 inch Weighting rod Wireline Tool String Material aluminum alloy Ⅰ. Introduction (B) A wireline stem weight bar is designed to serve two purposes. Firstly it is the weight required to overcome forces created by well pressure and the size of cable used...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

Wireline Accelerator Wireline Tool String I. Overview: Accelerators are often used in shallow well operations. In shallow well operations, due to the small elongation of the wire, if you want to use a hydraulic jar or a spring ...

Brand Name:Ruixin

Model Number:1.25inch-2.5inch

Place of Origin:China Baoji

Alloy Steel Weight stem Bar 5ft Wireline Tool String For Oil Well I. Overview: The weight stem bar is used to provide the weight required for the operation, so that the tool string can overcome the pressure acting on its section and the resistance of the ...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 1.875inch 2inch 2.25inch,2.5inch.3inch,4inch,5inch,6inch

Place of Origin:China Baoji

Tubing End Locator Wireline Tool String Ⅰ.Introduction The tubing end locator, as the name suggests, is a tool used to accurately measure the depth of tubing. This type of locator is positioned at the end of the tubing so that the depth of the tubing...

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

Tubing swage Wireline Tool String I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General ...

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.875inch 2.125inch 2.5inch

Place of Origin:China Baoji

...Wireline Tools 1.25 Inch Tungsten Filled Stem Wireline Tool String I.Introduction Tungsten Filled Stems,sometimes called Sinker bars,provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated.Tungsten Filled Stemsaslo enable the toolstring to fall against the differential pressure and friction at the wireline...

Brand Name:Ruixin

Model Number:1.25inch - 2.5inch

Place of Origin:China Baoji

...Wireline Tools 1.5 Inch Stem Lead Filled Wireline Tool String I.Introduction Lead Filled Stems,sometimes called Sinker bars,provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated.Lead Filled Stemsaslo enable the toolstring to fall against the differential pressure and friction at the wireline...

Brand Name:RuiXin

Model Number:1.5inch

Place of Origin:China Baoji

Wireline Slickline Tools String Weight Stem Bar QLS Connection 1.5inch product overview: 1 The QLS weight bar is used to provide the weight required for operation, so that the tool string can fall against the pressure acting on its section and the ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Swivel Joint

Place of Origin:China

...Wireline Tool String 1.25" - 2.5"​ The Swivel Joint is the knuckle joint, as the part of wireline tool string, the swivel joint is used to minimize the line twist when running in and and pulling out of the well. It is usually located below rope socket and the bearings permits rotational movement when maintaining longitudinal rigidity in the tool string...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Rope Socket

Place of Origin:China

...tool string. Available in various sizes, the rope socket consists of a body, spring, disc and spring support. The body of Disc & Spring type ...