wireline tool string calibration tool

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hydraulic Jar

Place of Origin:China

Slick Line Tools Hydraulic Jar For Wireline Tool String 1.5" - 2.5" The Hydraulic Jar is a wireline service tool designed for dependable upward jarring during wireline operations. When a strain is taken on the wireline the top sub and mandrel are pulled ...

Brand Name:Techcore

Model Number:1.25" Rope Socket

Place of Origin:CHINA

... socket in disc and spring type is used to attach wireline to the tools string. In the wireline operation, the disc and spring rope socket is firmly connected to the steel wire and the tool string by the wire in the rope cap. The inside is equipped with

Brand Name:ZZ TOP OIL TOOLS

Model Number:Rope Socket

Place of Origin:China

Slip Type Rope Socket Alloy Steel For Wireline Tool String 1.25" - 2.5" Slip type Rope socket is a kind of rope socket applied for wireline tool string. The slip type rope socket is designed for use with small braided lines up to 7/32” diameter. Slip type ...

Brand Name:ZZ Top

Model Number:Wireline tools for 0.108" wire

Place of Origin:CHINA

...e to any assembly of equipment run in the well to perform some type of operation. In wireline work, the string is run, manipulated and retrieved by the upward or downward movement of the wire which is itself raised and lowered by a winch at the surface.

Brand Name:Techcore

Model Number:Rope Socket Pear Drop

Place of Origin:CHINA

... socket is one type of the rope socked and used for connecting the downhole test instruments or the downhole tools to the slicklineThe Rope Socket-Pear Drop With Sleeve is used to attach wireline to the tool string. The pear drop rope socket is the most

Brand Name:ZZ TOP OIL TOOLS

Model Number:Wireline Weight Bar

Place of Origin:China

... the necessary weight to be be able to deploy a wireline toolstring and deliver impacts in wireline operations and to overcome the force created by well pressure on the cross section of the wireline in the well. The wireline sinker bar consists of top sub,

Brand Name:ZZ TOP OIL TOOLS

Model Number:Standard Stem

Place of Origin:China

Stem Weight Bar / Standard Stem For Wireline Tool String 1.5" - 2.5" The wireline stem or weight bars, sometime referred to as Sinker Bars, are designed to serve two purpose. Firstly the standard stem is the weight required to overcome forces ...

Brand Name:Techcore

Model Number:Weight Bar

Place of Origin:CHINA

...-box packing friction, and well pressure on the cross-sectional area of the wireline. Wireline standard stem can also transmit force either upward or downward to set or retrieve downhole controls. Wireline stems are available in various Lengths, ODs,

Brand Name:Techcore

Model Number:Wireline Stem-1

Place of Origin:CHINA

...Wireline Roller Stem Wireline Sinker Bar Wireline Stem A roller stem is a sort of wireline stem used for downhole wireline fishing operation. The wireline roller stem is designed to replace conventional stem for operation in deviated well bores. The rollers on the stem run along the underside wall of the tubing. Roller Stems are used with tool string...

Brand Name:Techcore

Model Number:Rope Socket Pear Drop

Place of Origin:CHINA

... model, which clamps the wireline by the pear-shaped wedge. The principle of operation is that the wire, wrapped round a groove in the pear drop, is wedged in a taper between the pear drop and the ...

Brand Name:Techcore

Model Number:Pear Drop Type Rope Socket

Place of Origin:CHINA

... are used for connecting the downhole test instruments or the downhole tools to the slickline. Rope Sockets are used as a means to connect wireline to the tool string. Since the steel wire rotates in the hoel, it is required that the inner part of the

Brand Name:Techcore

Model Number:Wireline Stems

Place of Origin:CHINA

Wireline Stems Weight Bar / Standard Stems For Tools Wireline String The wireline standard stem or weight bars, sometime referred to as Sinker Bars, are designed to serve two purpose. Firstly they are the weight required to overcome forces created by well pressure and the size of cable used and secondly they are the mass required to deliver impacts when setting or pulling devices in the well bore. Technical parameter of Wireline...

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

...Diamond Tubing Broach Gauge Cutter Wireline Tools Diamond Tubing Broach Gauge Cutter Wireline Ⅰ. Introduction The Diamond Tubing Broach Gauge Cutter Wireline are used to remove or broach tight spots in tubing strings using hardened cutting teeth to cut...

Brand Name:Techcore

Model Number:Wireline Jar

Place of Origin:CHINA

Wireline Link Jar Wireline Spang Jar Mechnical Jar Basic Wireline Tools The link jar is a kind of wireline mechanical jars which is the wireline basic tools used in wireline fishing operations with stems. The weight of stems and jars can be used by operator for jarring by pulling and then releasing wireline. The wireline link jars are available in various sizes and strokes. During the wireline...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hay Pulley

Place of Origin:China

Wireline Tools 16 Inch Hay Pulley For Wireline 0.108"-0.140" The Hay Pulley is the component of wireline tools for the wireline & slickline service. The Hay Pulley is used to control and manipulate the direction of the wireline from a horizontal positon...

Brand Name:Techcore

Model Number:Hay Pulley

Place of Origin:CHINA

... to a vertical position or route to the stuffing box from the wireline unit. This tool is generally positioned at the wellhead on the lubricator to reduce side pull force and to avoid lateral loading of the lubricator during heavy jarring operations.

Brand Name:Ruixin

Model Number:1.5inch 2inch 2.5inch 3inch 3.5inch 4inch

Place of Origin:China Baoji

...used to retrieve wireline tools or parts of wireline tools that are lost in the tubing. II. General Technical Parameters Size Fishing neck Connection To Catch Diameters 1.75＂ 1.375＂ 15/...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Wireline finder

Place of Origin:China

... fishing operations”. The Wire-finder has a standard wireline fishing neck and threads uppermost and a slotted skirt (fingers) down. The wire finder is generally used when there is a need tolocate, or ball up broken or parted slickline or wireline.

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools& Pulling Tools(GS-138---425 GS Series Tools), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools& Pulling Tools(GS-138---425 GS Series Tools), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...