knuckle joint wireline tool string

Brand Name:ZZ TOP OIL TOOLS

Model Number:Standard Stem

Place of Origin:China

Stem Weight Bar / Standard Stem For Wireline Tool String 1.5" - 2.5" The wireline stem or weight bars, sometime referred to as Sinker Bars, are designed to serve two purpose. Firstly the standard stem is the weight required to overcome forces ...

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.75inch 1.875inch 2inch 2.5inch

Place of Origin:China Baoji

... string accessory, used to provide flexibility within the wireline tool string. It is recommended to place a knuckle joint immediately below the rope socket when the rope socket does not offer rotation within the wireline .The PCE Wireline Knuckle Joint is

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...Wireline Knuckle Joint Wireline Tool String Wireline Knuckle Joint Wireline Tool String Ⅰ. Introduction (B) A wireline knuckle Joint is used to add flexibility to the tool string and it is effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However, adding knuckle joint in a string this situation can be avoided. Knuckle Joints...

Brand Name:Ruixin

Model Number:1.5inch 1.75inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...string accessory, used to provide flexibility within the wireline tool string. It is recommended to place a knuckle joint immediately below the rope socket when the rope socket does not offer rotation within the wireline . II. General technical parameters:

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.75inch 1.875inch 2.5inch

Place of Origin:China Baoji

...string. Because the weighting rod and the jar cannot adjust the bending degree, the universal joint can ensure the normal operation of the steel wire. Ⅱ. General Technical Parameters: Size Fishing neck Connection PN. 1.25＂ 1.187＂ ...

Brand Name:TECHCORE

Model Number:Wireline Knuckle Joint

Place of Origin:China

... are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string this situation can be avoided. Knuckle Joints are run immediately below Mechanical Jar.

Brand Name:ZZ Top

Model Number:Knuckle Joint-2"

Place of Origin:CHINA

Wireline Tools Roller Ball Knuckle Joint Slick Line Tools Basic String The Roller Ball Knuckle Joint is the component of wireline tool string. The Wireline Knuckle Joints are used to add flflexibility to the tool string and knuckle joints are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string...

Brand Name:Techcore

Model Number:Wireline Knuckle Joint

Place of Origin:CHINA

...knuckle joints are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string this situation can be avoided. Knuckle Joints are run immediately below

Brand Name:ZZ Top

Model Number:Wireline tools

Place of Origin:CHINA

... to the type of operation undertake.The tools can be attached to wireline or slickline and lowered into the well bore for well workover operation. So the wireline tools is also called slickline tools. In wireline work, the string is run, manipulated and

Brand Name:Ruixin

Model Number:1.5inch ,1.75inch，1.875inch，2.5inch.

Place of Origin:China Baoji

...Joint Wireline And Slickline Tool String QLS Quick Joint Wireline Tool String I.Introduction QLS Quick Joint is used to minimize the line twist when running in and pulling out of the well. It is usually located below rope socket and the bearings permits rotational movement when maintaining longitudinal rigidity in the tool string...

Brand Name:Ruixin

Model Number:2inch

Place of Origin:China Baoji

... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch hole. II. Structural characteristics: The ball structure provides the ability to rotate and ...

Brand Name:Ruixin

Model Number:1-11/16"

Place of Origin:China Baoji

... for tool string. Because the weight bar and jar cannot adjust its bending degree, The Mono-conductor Knuckle Joint can ensure the normal operation of the cable. II. Technical parameters: 1. specification: 1-11/16 "; 2. Connecting thread: 1-3/16-12un; 3.

Brand Name:Ruixin

Model Number:1.25inch ,1.5inch，1.875inch，2.5inch.

Place of Origin:China Baoji

...Joint Wireline Tool String 1.5 inch I. Overview: The QLS quick Joint is connectors for wire tool strings that replace conventional threaded connections. II. Parameter: Size FN Connection 1.25＂ 1.187＂ 15/16UN 1.5＂ 1.375＂ 15/16UN 1.875＂ 1.75＂ 1-1/16UN 2.5＂ 2.313＂ 1-9/16UN III.Structural features QLS quick joint is an integral part of any cable tool...

Brand Name:ZZ Top

Model Number:1.5" Wireline Swivel Joint

Place of Origin:CHINA

...Wireline Tool String Swivel Joint 1.5" Slick Line Tools The Swivel Joint is the component of wireline tool string, which is designed to assist in the changing of components in the wireline tool string. The swivel design allows the operator to change out long sections without having to physically rotate them. The wireline swivel joint is installed directly below the rope socket to provide rotation of the tool string...

Brand Name:RuiXin

Model Number:1.875inch

Place of Origin:China BaoJi

... up and down. The effect of the jar is largely determined by the weight of the connecting rod on the jar and the stroke of the jar. The size and verticality of the tubing, the size and depth of the tool, the density and viscosity of

Brand Name:Techcore

Model Number:Wireline Jar-2

Place of Origin:CHINA

...transmit effective jarring forces up and down. The knuckle jar not only has the rotation and change function of the universal section, but also has the function of the jarring, which is usually applied in some workings where the tool length is limited and

Brand Name:Techcore

Model Number:Swivel Joint

Place of Origin:CHINA

Wireline Basic Tools Swivel Joint Downhole Heavy Duty Swivel joint The swivel joint is a kind of the wireline basic tools, it is the part of the wireline tool string. The wireline heavy duty swivel joint is connected under the wireline rope socket and used to minimize the line twist when running in and an pulling out of the well. The function of the wireline swivel joint is to save energy and solve the rotating force generated when the wire tool

Brand Name:ZZ TOP OIL TOOLS

Model Number:Knuckle Joint

Place of Origin:China

... on the wireline the top sub and mandrel are pulled upward while the piston is impeded in its upward movement by the Hydraulic fluid. This delaying action of slick line hydraulic ...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2.5inch

Place of Origin:China Baoji

... centralizer can overcome friction which can be caused by the tool string scraping against the tubing wall. Ⅱ. General Technical Parameters Size O.D. of roller Fishing neck Connection PN. 1.5＂ 1.75＂ 1.375＂ 15/...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

Wireline Crossover Wireline Tool String Introduction The wireline crossover is a wireline tool string adapter designed to connect two tool string items with incompatible threads. The material has good strength and toughness. Precise dimensional processing...