knuckle joint wireline tool string

Brand Name:Techcore

Model Number:1.25" Rope Socket

Place of Origin:CHINA

... socket in disc and spring type is used to attach wireline to the tools string. In the wireline operation, the disc and spring rope socket is firmly connected to the steel wire and the tool string by the wire in the rope cap. The inside is equipped with

Brand Name:ZZ Top

Model Number:Wireline tools for 0.108" wire

Place of Origin:CHINA

...e to any assembly of equipment run in the well to perform some type of operation. In wireline work, the string is run, manipulated and retrieved by the upward or downward movement of the wire which is itself raised and lowered by a winch at the surface.

Brand Name:Techcore

Model Number:Weight Bar

Place of Origin:CHINA

...-box packing friction, and well pressure on the cross-sectional area of the wireline. Wireline standard stem can also transmit force either upward or downward to set or retrieve downhole controls. Wireline stems are available in various Lengths, ODs,

Brand Name:Techcore

Model Number:Wireline Stem-1

Place of Origin:CHINA

...Wireline Roller Stem Wireline Sinker Bar Wireline Stem A roller stem is a sort of wireline stem used for downhole wireline fishing operation. The wireline roller stem is designed to replace conventional stem for operation in deviated well bores. The rollers on the stem run along the underside wall of the tubing. Roller Stems are used with tool string...

Brand Name:Techcore

Model Number:Rope Socket Pear Drop

Place of Origin:CHINA

... model, which clamps the wireline by the pear-shaped wedge. The principle of operation is that the wire, wrapped round a groove in the pear drop, is wedged in a taper between the pear drop and the ...

Brand Name:Techcore

Model Number:Pear Drop Type Rope Socket

Place of Origin:CHINA

... are used for connecting the downhole test instruments or the downhole tools to the slickline. Rope Sockets are used as a means to connect wireline to the tool string. Since the steel wire rotates in the hoel, it is required that the inner part of the

Brand Name:Techcore

Model Number:Wireline Stems

Place of Origin:CHINA

Wireline Stems Weight Bar / Standard Stems For Tools Wireline String The wireline standard stem or weight bars, sometime referred to as Sinker Bars, are designed to serve two purpose. Firstly they are the weight required to overcome forces created by well pressure and the size of cable used and secondly they are the mass required to deliver impacts when setting or pulling devices in the well bore. Technical parameter of Wireline...

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools& Pulling Tools(GS-138---425 GS Series Tools), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools& Pulling Tools(GS-138---425 GS Series Tools), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools, For Running & Pulling ), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...

Brand Name:VCTSY

Model Number:GS-138, GS-181, GS-231, GS-282, GS-312, GS-40, GS-425

Place of Origin:China

...Tools, For Running & Pulling ), AISI4140 The GS series tools are used for running and pulling. These tools can be used with the standard wireline tools to run and pull the downhole tools. Features Providing the standard joint and fishing neck Material of the body: AISI4140. Running and pulling by the standard wireline tool...

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

...Diamond Tubing Broach Gauge Cutter Wireline Tools Diamond Tubing Broach Gauge Cutter Wireline Ⅰ. Introduction The Diamond Tubing Broach Gauge Cutter Wireline are used to remove or broach tight spots in tubing strings using hardened cutting teeth to cut...

Brand Name:RuiXin

Model Number:1.25inch～5.5inch

Place of Origin:China BaoJi

.... The tool can be jolted down to disengage, and can also be jolted up to disengage by installing the GU adapter. You are advised to use the GR Pulling tool when downward jolt cannot be performed before ejection. GS pulling tool includes an upper joint, an

Place of Origin:China

Brand Name:Boyu

Model Number:TYSLX-1

... Diameter: 30mm 5. Boyu Brand Description: The swivel joints are suitable to connect the pulling rope to the mesh sock joint mounted on the conductor, they are mounted on thrust bearings and they are designed to avoid torsion stain accumulation. They

Place of Origin:China

Brand Name:Boyu

Model Number:TYSLX-3

...Joints Transmission Line Stringing Accessories Tools Outside Diameter 37mm Quick details: 1. Transmission Line Stringing Equipment Accessories & Tools 2. Swivel Joints 3. Rated Load: 30kN 4. Outside Diameter: 37mm 5. Boyu Brand Description: The swivel joints are suitable to connect the pulling rope to the mesh sock joint...

Brand Name:Linkai

Model Number:SLX

Place of Origin:NINGBO CHINA

...Joints Transmission Line Stringing Tools Quick details: 1. Transmission Line Stringing Equipment Accessories & Tools 2. Swivel Joints 3. Rated Load: 30kN 4. Outside Diameter: 37mm 5. Dong Huan Brand Swivel Joint For Connecting Mesh Sock And Pulling Rope are suitable to connect the pulling rope to the mesh sock joint mounted on the conductors Swivel Joint For Connecting Mesh Sock And Pulling Rope Swivel Joint

Brand Name:RuiXin

Model Number:2.25inch

Place of Origin:China BaoJi

2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint mounted in it. The tool is designed to maintain only the pressure from above, allowing a small amount of ...

Brand Name:Suntech

Model Number:20105A

Place of Origin:Ningbo,China

...Cable Mesh Sock Joints 25KN OPGW Stringing Tools Feature 1. As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to strench. 2. The most ideal tool for electric power construction...

Brand Name:Lingkai

Model Number:SLX

Place of Origin:NINGBO CHINA

Swivel Joint connector is used to pull conductors. It is constructed with ball bearings inside, to eliminate the torque force when stringing conductors. The swivel joints are suitable to connect the pulling rope to the mesh socket joints which are ...

Brand Name:GALAXY

Model Number:GXHSH

Place of Origin:CHINA

... out wire of various specifications, which can release the twisting strength of wire rope. Functional performance: Swivel connector is a special connecting tool for overhead transmission line stringing construction. It is used to connect traction rope and