knuckle joint wireline tool string

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

API Q1 Wireline Bull Nose Wireline And Slickline Tools Alloy Steel Wireline Bull Nose Wireline Tool String I. Overview: Wireline Bull Nose connected to the lower end of the cable instrument, is also the lowest end of the whole tool string, and plays a ...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

...Wireline Tools And Equipment Wireline Roller Ball Sub Wireline Tool String I. Overview A wireline roller ball sub is utilized when running in heavily deviated wells, especially if there are dog legs within the completion string. The roller ball overcomes friction which can be caused by the tool string...

Brand Name:Ruixin

Model Number:1.5inch-4.5inch.

Place of Origin:China Baoji

...ch has settled on top of the subsurface equipment preventing recovery of the equipment by regular wireline operations.The sand pump bailer is a pump type tool which operates on the conventional lift pump and piston principle.A double male adapter sub an

Brand Name:Ruixin

Model Number:1.5inch-4.5inch.

Place of Origin:China Baoji

...Wireline Tool String 2 inch Sand Pump Bailer Wireline Tool String I. Introduction: The hydraulic pump bailer is a wireline service tool used to clear debris which has settled on top of the subsurface equipment preventing recovery of the equipment by regular wireline operations. The sand pump bailer is a pump type tool...

Brand Name:RuiXin

Model Number:1.5inch

Place of Origin:China Baoji

...Wireline Releasable Rope Socket Wireline Tool String product overview: Rui Xin Releasable Rope Socket is designed to release only in the event that a wireline toolstring cannot be recovered from the wellbore.The trigger device is activated by a drop bar, which is dropped down the wire in a similar manner to a go-devil or wireline...

Brand Name:Techcore

Model Number:CT knuckle joint

Place of Origin:CHINA

...Tools Knuckle Joint Introduction of Knuckle Joint The knuckle joints are usually used under the hydraulic jar to improve the flexibility and flexibility of the tool string, facilitate tool entry, and conventional universal joints do not pass Torque, the lower tool string can be rotated 360°, and the torsion-proof universal joint can transmit torque through the internal limit key structure. Universal joint...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

... up and down. The effect of jarring depends to a large extent on the weight of the jar upper link and the jar stroke, as well as tubing size and verticality, tool size and depth, fluid density and viscosity, well pressure, and wire size. Has a positive or

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

1.875 inch Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated well bores. The rollers on the stem run along the underside wall of the tubing. The use of rollers...

Brand Name:Ruixin

Model Number:1.25inch 1.5inch 1.875inch 2.125inch 2.5inch

Place of Origin:China Baoji

...Wireline Tools 1.25 Inch Tungsten Filled Stem Wireline Tool String I.Introduction Tungsten Filled Stems,sometimes called Sinker bars,provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated.Tungsten Filled Stemsaslo enable the toolstring to fall against the differential pressure and friction at the wireline...

Brand Name:Ruixin

Model Number:1.25inch - 2.5inch

Place of Origin:China Baoji

...Wireline Tools 1.5 Inch Stem Lead Filled Wireline Tool String I.Introduction Lead Filled Stems,sometimes called Sinker bars,provide the mass required in wireline operations although they should not be used in operations where heavy jarring is anticipated.Lead Filled Stemsaslo enable the toolstring to fall against the differential pressure and friction at the wireline...

Brand Name:Techcore

Model Number:CTSKJ1755001

Place of Origin:CHINA

...Tools Surface knuckle joint Alloy Seel CT Joint Overview of CT Surface knuckle joint The surface knuckle joint is applied for quick connection to the coiled tubing, when incorporated between hydraulic jars and the manipulation tools, the surface knuckle jonts provide additional a degree flexibility in the coiled tubing tool string, which can be wrapped on the drum easily by the knuckle structure. The surface knuckle

Brand Name:ZZ TOP OIL TOOLS

Model Number:Rope Socket

Place of Origin:China

... model, which clamps the wireline by the pear-shaped wedge. The principle of operation is that the wire, wrapped round a groove in the pear drop, is wedged in a taper between the pear drop and the ...

Brand Name:Ruixin

Model Number:1.25inch-2.5inch

Place of Origin:China Baoji

1.5 inch Weighting rod Wireline Tool String Material aluminum alloy Ⅰ. Introduction (B) A wireline stem weight bar is designed to serve two purposes. Firstly it is the weight required to overcome forces created by well pressure and the size of cable used...

Brand Name:Ruixin

Model Number:1.5inch 1.875inch 2inch 2.125inch

Place of Origin:China Baoji

Wireline Accelerator Wireline Tool String I. Overview: Accelerators are often used in shallow well operations. In shallow well operations, due to the small elongation of the wire, if you want to use a hydraulic jar or a spring ...

Brand Name:Ruixin

Model Number:1.25inch-2.5inch

Place of Origin:China Baoji

Alloy Steel Weight stem Bar 5ft Wireline Tool String For Oil Well I. Overview: The weight stem bar is used to provide the weight required for the operation, so that the tool string can overcome the pressure acting on its section and the resistance of the ...

Brand Name:Ruixin

Model Number:1.25inch,1.5inch 1.875inch 2inch 2.25inch,2.5inch.3inch,4inch,5inch,6inch

Place of Origin:China Baoji

Tubing End Locator Wireline Tool String Ⅰ.Introduction The tubing end locator, as the name suggests, is a tool used to accurately measure the depth of tubing. This type of locator is positioned at the end of the tubing so that the depth of the tubing...

Brand Name:Ruixin

Model Number:1.25inch~5inch

Place of Origin:China Baoji

Tubing swage Wireline Tool String I. Introduction Tubing swage is a tool to shape the changed diameter of to guarantee that the downhole device can pass smoothly or to get through the flavedo-type blocks at the end of tubing. II. General ...

Brand Name:Techcore

Model Number:Rope Socket Pear Drop

Place of Origin:CHINA

... socket is one type of the rope socked and used for connecting the downhole test instruments or the downhole tools to the slicklineThe Rope Socket-Pear Drop With Sleeve is used to attach wireline to the tool string. The pear drop rope socket is the most

Brand Name:RuiXin

Model Number:1.5inch

Place of Origin:China Baoji

Wireline Slickline Tools String Weight Stem Bar QLS Connection 1.5inch product overview: 1 The QLS weight bar is used to provide the weight required for operation, so that the tool string can fall against the pressure acting on its section and the ...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Wireline Weight Bar

Place of Origin:China

... the necessary weight to be be able to deploy a wireline toolstring and deliver impacts in wireline operations and to overcome the force created by well pressure on the cross section of the wireline in the well. The wireline sinker bar consists of top sub,